Re: [PATCH ppc-next] powerpc/fsl-booke: don't load early TLB at once

On Thu, Sep 20, 2018 at 07:31:33PM -0500, Scott Wood wrote:

On Fri, 2018-09-21 at 00:48 +0200, David Lamparter wrote:

quoted

This is a *partial* revert of "powerpc/85xx: Load all early TLB entries
at once" (d9e1831a420267a7ced708bb259d65b0a3c0344d.)

My dusty old P4080DS just completely fails to boot (no output at all)
without this revert.  I have no clue what's going on here, I just
bisected it down and since it looks like an optimization to me I just
reverted it - and voilá, the P4080 boots again.

It's not an optimization; it was required to get kdump working, at least

Oh, my apologies for misunderstanding the code.

for certain choices of crash kernel location.  I just tried booting a 32-
bit kernel and did not see this problem -- but I don't have access to a
p4080ds anymore.  I tried with qemu e500mc, and also running a 32-bit
kernel on e6500 (needs a tiny change to get past SMP init, since 32-bit
isn't really supported on e6500, but you do get output even without that).

Hrm, maybe I should just make it use the old mechanism under an #ifdef
CONFIG_PPC32?  Better to boot and have kdump not work than not boot.
(But obviously finding the actual problem would be best.)

Do you have a JTAG that can be used to find out where it's hanging?  If
not, I can try to get early debug working (needs an early IOMMU mapping).

I only have JTAG tools for ARM chips available; hardware wise I could
probably solder up an adapter but software wise I have absoutely no clue
how to fire up a session on anything PPC...  I'm a novice openocd user,
that's it.

York, can you try booting the latest kernel on p4080ds?

d9e1831a42 has been around for quite some time, 4.4 already has it.  I
was a bit surprised noone has run into this, but then again P4080 is not
exactly the most recent/interesting hardware.

Cheers,


-David