[PATCH v3 6/9] kbuild: consolidate Devicetree dtb build rules
From: Rob Herring <robh@kernel.org>
Date: 2018-09-10 15:04:29
Also in:
linux-arm-kernel, linux-devicetree, linux-kbuild, linux-mips, lkml
Subsystem:
arm port, arm64 port (aarch64 architecture), kernel build + files below scripts/ (unless maintained elsewhere), linux for powerpc (32-bit and 64-bit), microblaze architecture, mips, nios2 architecture, open firmware and flattened device tree, synopsys arc architecture, tensilica xtensa port (xtensa), the rest · Maintainers:
Russell King, Catalin Marinas, Will Deacon, Nathan Chancellor, Nicolas Schier, Madhavan Srinivasan, Michael Ellerman, Michal Simek, Thomas Bogendoerfer, Dinh Nguyen, Simon Schuster, Rob Herring, Saravana Kannan, Vineet Gupta, Chris Zankel, Max Filippov, Linus Torvalds
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <redacted> Acked-by: Paul Burton <redacted> Acked-by: Ley Foon Tan <redacted> Cc: Masahiro Yamada <redacted> Cc: Michal Marek <redacted> Cc: Vineet Gupta <redacted> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <redacted> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <redacted> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org> --- Makefile | 35 ++++++++++++++++++++++++++++++- arch/arc/Makefile | 6 ------ arch/arm/Makefile | 20 +----------------- arch/arm64/Makefile | 17 +-------------- arch/c6x/Makefile | 2 -- arch/h8300/Makefile | 11 +--------- arch/microblaze/Makefile | 4 +--- arch/microblaze/boot/dts/Makefile | 2 ++ arch/mips/Makefile | 15 +------------ arch/nds32/Makefile | 2 +- arch/nios2/Makefile | 7 ------- arch/nios2/boot/Makefile | 4 ---- arch/powerpc/Makefile | 3 --- arch/xtensa/Makefile | 12 +---------- scripts/Makefile | 3 +-- scripts/Makefile.lib | 2 +- scripts/dtc/Makefile | 2 +- 17 files changed, 46 insertions(+), 101 deletions(-)
diff --git a/Makefile b/Makefile
index 19948e556941..c43859eba70f 100644
--- a/Makefile
+++ b/Makefile@@ -1071,7 +1071,7 @@ include/config/kernel.release: $(srctree)/Makefile FORCE # Carefully list dependencies so we do not try to build scripts twice # in parallel PHONY += scripts -scripts: scripts_basic asm-generic gcc-plugins $(autoksyms_h) +scripts: scripts_basic scripts_dtc asm-generic gcc-plugins $(autoksyms_h) $(Q)$(MAKE) $(build)=$(@) # Things we need to do before we recursively start building the kernel
@@ -1215,6 +1215,33 @@ kselftest-merge: $(srctree)/tools/testing/selftests/*/config +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig +# --------------------------------------------------------------------------- +# Devicetree files + +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) +dtstree := arch/$(SRCARCH)/boot/dts +endif + +ifdef CONFIG_OF_EARLY_FLATTREE + +%.dtb : scripts_dtc + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ + +PHONY += dtbs dtbs_install +dtbs: scripts_dtc + $(Q)$(MAKE) $(build)=$(dtstree) + +dtbs_install: dtbs + $(Q)$(MAKE) $(dtbinst)=$(dtstree) + +all: dtbs + +endif + +PHONY += scripts_dtc +scripts_dtc: scripts_basic + $(Q)$(MAKE) $(build)=scripts/dtc + # --------------------------------------------------------------------------- # Modules
@@ -1424,6 +1451,12 @@ help: @echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing' @echo ' .config.' @echo '' + @$(if $(dtstree), \ + echo 'Devicetree:'; \ + echo '* dtbs - Build device tree blobs for enabled boards'; \ + echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'; \ + echo '') + @echo 'Userspace tools targets:' @echo ' use "make tools/help"' @echo ' or "cd tools; make help"'
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index fb026196aaab..5c7bc6d62f43 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile@@ -132,11 +132,5 @@ boot_targets += uImage uImage.bin uImage.gz $(boot_targets): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ -%.dtb %.dtb.S %.dtb.o: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ - -dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts - archclean: $(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d1516f85f25d..161c2df6567e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile@@ -307,12 +307,7 @@ else KBUILD_IMAGE := $(boot)/zImage endif -# Build the DT binary blobs if we have OF configured -ifeq ($(CONFIG_USE_OF),y) -KBUILD_DTBS := dtbs -endif - -all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) +all: $(notdir $(KBUILD_IMAGE)) archheaders:
@@ -339,17 +334,6 @@ $(BOOT_TARGETS): vmlinux $(INSTALL_TARGETS): $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: | scripts - $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ - -PHONY += dtbs dtbs_install - -dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts - -dtbs_install: - $(Q)$(MAKE) $(dtbinst)=$(boot)/dts - PHONY += vdso_install vdso_install: ifeq ($(CONFIG_VDSO),y)
@@ -371,8 +355,6 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' - echo '* dtbs - Build device tree blobs for enabled boards' - echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel'
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 106039d25e2f..b4e994cd3a42 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile@@ -113,9 +113,8 @@ core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a # Default target when executing plain make boot := arch/arm64/boot KBUILD_IMAGE := $(boot)/Image.gz -KBUILD_DTBS := dtbs -all: Image.gz $(KBUILD_DTBS) +all: Image.gz Image: vmlinux
@@ -127,17 +126,6 @@ Image.%: Image zinstall install: $(Q)$(MAKE) $(build)=$(boot) $@ -%.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ - -PHONY += dtbs dtbs_install - -dtbs: prepare scripts - $(Q)$(MAKE) $(build)=$(boot)/dts - -dtbs_install: - $(Q)$(MAKE) $(dtbinst)=$(boot)/dts - PHONY += vdso_install vdso_install: $(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
@@ -145,7 +133,6 @@ vdso_install: # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) - $(Q)$(MAKE) $(clean)=$(boot)/dts # We need to generate vdso-offsets.h before compiling certain files in kernel/. # In order to do that, we should use the archprepare target, but we can't since
@@ -160,8 +147,6 @@ vdso_prepare: prepare0 define archhelp echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' - echo '* dtbs - Build device tree blobs for enabled boards' - echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index 3fe8a948e94c..b7aa854f7008 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile@@ -40,9 +40,7 @@ boot := arch/$(ARCH)/boot DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS))) export DTB -ifneq ($(DTB),) core-y += $(boot)/dts/ -endif # With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 58634e6bae92..4003ddc616e1 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile@@ -31,21 +31,12 @@ CROSS_COMPILE := h8300-unknown-linux- endif core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ -ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""' -core-y += arch/h8300/boot/dts/ -endif +core-y += arch/$(ARCH)/boot/dts/ libs-y += arch/$(ARCH)/lib/ boot := arch/h8300/boot -%.dtb %.dtb.S %.dtb.o: | scripts - $(Q)$(MAKE) $(build)=arch/h8300/boot/dts arch/h8300/boot/dts/$@ - -PHONY += dtbs -dtbs: scripts - $(Q)$(MAKE) $(build)=arch/h8300/boot/dts - archmrproper: archclean:
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 4f3ab5707265..0823d291fbeb 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile@@ -65,9 +65,7 @@ boot := arch/microblaze/boot # Are we making a simpleImage.<boardname> target? If so, crack out the boardname DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) -ifneq ($(DTB),) - core-y += $(boot)/dts/ -endif +core-y += $(boot)/dts/ # defines filename extension depending memory management type ifeq ($(CONFIG_MMU),)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index 1f77913d404d..fe9af267f598 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # +ifneq ($(DTB),) obj-y += linked_dtb.o # Ensure system.dtb exists
@@ -11,6 +12,7 @@ ifneq ($(DTB),system) $(obj)/system.dtb: $(obj)/$(DTB).dtb $(call if_changed,cp) endif +endif quiet_cmd_cp = CP $< $@$2 cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d74b3742fa5d..d43eeaa6d75b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile@@ -407,18 +407,7 @@ endif CLEAN_FILES += vmlinux.32 vmlinux.64 # device-trees -core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/ - -%.dtb %.dtb.S %.dtb.o: | scripts - $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@ - -PHONY += dtbs -dtbs: scripts - $(Q)$(MAKE) $(build)=arch/mips/boot/dts - -PHONY += dtbs_install -dtbs_install: - $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts +core-y += arch/mips/boot/dts/ archprepare: ifdef CONFIG_MIPS32_N32
@@ -461,8 +450,6 @@ define archhelp echo ' uImage.lzma - U-Boot image (lzma)' echo ' uImage.lzo - U-Boot image (lzo)' echo ' uzImage.bin - U-Boot image (self-extracting)' - echo ' dtbs - Device-tree blobs for enabled boards' - echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo echo ' These will be default as appropriate for a configured platform.' echo
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
index 63f4f173e5f4..adcac830d051 100644
--- a/arch/nds32/Makefile
+++ b/arch/nds32/Makefile@@ -43,7 +43,7 @@ CHECKFLAGS += -D__NDS32_EB__ endif boot := arch/nds32/boot -core-$(BUILTIN_DTB) += $(boot)/dts/ +core-y += $(boot)/dts/ .PHONY: FORCE
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
index db2e78fe65c7..52c03e60b114 100644
--- a/arch/nios2/Makefile
+++ b/arch/nios2/Makefile@@ -56,12 +56,6 @@ all: vmImage archclean: $(Q)$(MAKE) $(clean)=$(nios2-boot) -%.dtb %.dtb.S %.dtb.o: | scripts - $(Q)$(MAKE) $(build)=$(nios2-boot)/dts $(nios2-boot)/dts/$@ - -dtbs: - $(Q)$(MAKE) $(build)=$(nios2-boot)/dts - $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
@@ -74,5 +68,4 @@ define archhelp echo ' (your) ~/bin/$(INSTALLKERNEL) or' echo ' (distribution) /sbin/$(INSTALLKERNEL) or' echo ' install to $$(INSTALL_PATH)' - echo ' dtbs - Build device tree blobs for enabled boards' endef
diff --git a/arch/nios2/boot/Makefile b/arch/nios2/boot/Makefile
index 0b48f1bf086d..37dfc7e584bc 100644
--- a/arch/nios2/boot/Makefile
+++ b/arch/nios2/boot/Makefile@@ -31,9 +31,5 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(obj)/compressed/vmlinux: $(obj)/vmlinux.gz FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -targets += $(dtb-y) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - install: sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 53ea887eb34e..42f225f6ec93 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile@@ -293,9 +293,6 @@ $(BOOT_TARGETS2): vmlinux bootwrapper_install: $(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -%.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@) - # Used to create 'merged defconfigs' # To use it $(call) it with the first argument as the base defconfig # and the second argument as a space separated list of .config files to merge,
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 295c120ed099..13fd3301c517 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile@@ -84,28 +84,18 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) head-y := arch/xtensa/kernel/head.o core-y += arch/xtensa/kernel/ arch/xtensa/mm/ core-y += $(buildvar) $(buildplf) +core-y += arch/xtensa/boot/dts/ libs-y += arch/xtensa/lib/ $(LIBGCC) drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/ -ifneq ($(CONFIG_BUILTIN_DTB),"") -core-$(CONFIG_OF) += arch/xtensa/boot/dts/ -endif - boot := arch/xtensa/boot all Image zImage uImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -%.dtb: - $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ - -dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts - define archhelp @echo '* Image - Kernel ELF image with reset vector' @echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)' @echo '* uImage - U-Boot wrapped image' - @echo ' dtbs - Build device tree blobs for enabled boards' endef
diff --git a/scripts/Makefile b/scripts/Makefile
index 61affa300d25..ece52ff20171 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile@@ -39,8 +39,7 @@ build_unifdef: $(obj)/unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux -subdir-$(CONFIG_DTC) += dtc subdir-$(CONFIG_GDB_SCRIPTS) += gdb # Let clean descend into subdirs -subdir- += basic kconfig package gcc-plugins +subdir- += basic dtc kconfig package gcc-plugins
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 61e596650ed3..8fe4468f9bda 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib@@ -283,7 +283,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE quiet_cmd_dtc = DTC $@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ - $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ + $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -O dtb -o $@ -b 0 \ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 1c943e03eaf2..e535b457babb 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # scripts/dtc makefile -hostprogs-y := dtc +hostprogs-$(CONFIG_DTC) := dtc always := $(hostprogs-y) dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
--
2.17.1