On Tue, Jul 31, 2018 at 10:29:53AM -0400, Alexei Colin wrote:
quoted hunk ↗ jump to hunk
Platforms with a PCI bus will be offered the RapidIO menu since they may
be want support for a RapidIO PCI device. Platforms without a PCI bus
that might include a RapidIO IP block will need to "select HAS_RAPIDIO"
in the platform-/machine-specific "config ARCH_*" Kconfig entry.
Tested that kernel builds for ARM with the RapidIO subsystem and switch
drivers enabled.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: John Paul Walters <redacted>
Cc: <redacted>
Cc: x86@kernel.org
Cc: <redacted>
Cc: <redacted>
Cc: <redacted>
Signed-off-by: Alexei Colin <redacted>
---
arch/arm/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index afe350e5e3d9..602a61324890 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1278,6 +1278,8 @@ config PCI_HOST_ITE8152
source "drivers/pci/Kconfig"
+source "drivers/rapidio/Kconfig"
+
source "drivers/pcmcia/Kconfig"
Why not place the new Kconfig file after pcmcia? That way, it is in
a consistent position wrt architectures such as powerpc, and it is
also in alphabetical order.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up