Re: [PATCH] sound: soc: fsl: Do not set DAI sysclk when it is equal to system freq

On Wed, Sep 06, 2017 at 08:35:50PM +0200, Łukasz Majewski wrote:
 

	clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
		 <&clks IMX6QDL_CLK_SSI2>;
	clock-names = "ipg", "baud";

quoted

quoted

 			dailink_master: cpu {
 			    sound-dai = <&ssi2>;
		    clock = <&SSSS>;

	If possible I do prefer a solution, which uses only DTS.
Side question - how to refer to baud clock from [1]?

Just add a property to this cpu node like:
	clock = <&clks IMX6QDL_CLK_SSI2>;

quoted

quoted

		    system-clock-frequency = <XXXX>;

This would not be necessary unless you want to specify a clock rate
so as to override the clock rate configuration in hw_params().

quoted

This is the right solution based on current simple-card driver. For
SSI (having two clocks), you have to specify the baud clock in the
cpu node like that. I believe this is what the simple-card designer
expected users to do since the cpu node is the first place that the
driver tries to look at.

I will give a shoot the option with adding the ipg clock.

No, not ipg clock. You should use the second clock -- baud clock.