Sukadev Bhattiprolu [off-list ref] writes:

Michael Ellerman [mpe@ellerman.id.au] wrote:

quoted

Sukadev Bhattiprolu [off-list ref] writes:

quoted

diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c
index 2dd4b63..24288dd 100644
--- a/arch/powerpc/platforms/powernv/vas-window.c
+++ b/arch/powerpc/platforms/powernv/vas-window.c

@@ -879,11 +887,92 @@ struct vas_window *vas_rx_win_open(int vasid, enum vas_cop_type cop,
 }
 EXPORT_SYMBOL_GPL(vas_rx_win_open);
 
-/* stub for now */
+static void poll_window_busy_state(struct vas_window *window)
+{
+	int busy;
+	uint64_t val;
+
+retry:
+	/*
+	 * Poll Window Busy flag
+	 */
+	val = read_hvwc_reg(window, VREG(WIN_STATUS));
+	busy = GET_FIELD(VAS_WIN_BUSY, val);
+	if (busy) {
+		val = 0;
+		schedule_timeout(2000);

What's 2000?

That's in jiffies, so it's not a fixed amount of time.

But on a typical config that will be 20 _seconds_ ?!

Ok. Should I change to that just HZ and

Does the hardware give us any idea how long we need to wait?

HZ is better I guess but it's still a long time.

quoted

But you haven't set the task state, so AFAIK it will just return
instantly.

call set_current_state(TASK_UNINTERRUPTIBLE) before the schedule_timeout()?

Yes.

quoted

quoted

+	val = read_hvwc_reg(window, VREG(WIN_CTX_CACHING_CTL));
+	cached = GET_FIELD(VAS_WIN_CACHE_STATUS, val);
+	if (cached) {
+		val = 0ULL;
+		val = SET_FIELD(VAS_CASTOUT_REQ, val, 1);
+		val = SET_FIELD(VAS_PUSH_TO_MEM, val, 0);
+		write_hvwc_reg(window, VREG(WIN_CTX_CACHING_CTL), val);

Sigh, I still don't like that macro :)

:-) For one thing, I have used it a lot now and secondly isn't it easier
to know that VAS_CASTOUT_REQ bit is set to 1 without worrying about its
bit position?

Yeah I guess it depends what you're doing. Are you comparing the code to
the spec, where seeing the name is probably what you want?

Or are you debugging the code running on hardware, where you have a dump
of register values or a trace etc. and you don't have any names just hex
values.

At least in my experience I spend more time doing the latter, so being
able to match the hex values in the code up with values I see in memory
or in registers is preferable.

But it's your code so I'll stop whining about that macro :)


cheers