Re: [PATCH 0/4] Support for the FSP2 476fpe board in arch/powerpc

Hey Ivan,

Please use joel@jms.id.au when you cc me on patches. That other
address won't work for most people.

Cheers,

Joel

On Mon, May 15, 2017 at 10:37 PM, Ivan Mikhaylov [off-list ref] wrote:

This adds support for the FSP2 (476fpe) board. This includes code in
arch/powerpc/platforms/44x for board initialization. Only uImage is
supported by now. Also there was some problem with whole watchdog TCR
rewrite which causing unexpected very early panic and fixed by 4 patch.
dts and defconfig for common usage included as well. Tested on FSP2 board
with uboot and initramfs image.

Ivan Mikhaylov (4):
  arch/powerpc/44x/fsp2: platform support for fsp2(476fpe) board
  arch/powerpc/44x/fsp2: add device tree for fsp2 board
  arch/powerpc/44x/fsp2: add defconfig for fsp2 board
  arch/powerpc/44x/fsp2: wdt tcr update instead of whole rewrite

 arch/powerpc/boot/dts/fsp2.dts          |  608 +++++++++++++++++++++++++++++++
 arch/powerpc/configs/44x/fsp2_defconfig |  126 +++++++
 arch/powerpc/kernel/time.c              |   16 +
 arch/powerpc/platforms/44x/Kconfig      |   12 +
 arch/powerpc/platforms/44x/Makefile     |    1 +
 arch/powerpc/platforms/44x/fsp2.c       |   62 ++++
 6 files changed, 825 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsp2.dts
 create mode 100644 arch/powerpc/configs/44x/fsp2_defconfig
 create mode 100644 arch/powerpc/platforms/44x/fsp2.c