Thread (27 messages) 27 messages, 2 authors, 2016-03-12

Re: [v8,07/23] powerpc/8xx: Fix vaddr for IMMR early remap

flat view

From: Scott Wood <oss@buserror.net>
Date: 2016-03-11 22:52:14
Also in: lkml

On Tue, Feb 09, 2016 at 05:08:00PM +0100, Christophe Leroy wrote:
quoted hunk ↗ jump to hunk
Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
648K rodata, 508K init, 290K bss, 6644K reserved)
Kernel virtual memory layout:
  * 0xfffdf000..0xfffff000  : fixmap
  * 0xfde00000..0xfe000000  : consistent mem
  * 0xfddf6000..0xfde00000  : early ioremap
  * 0xc9000000..0xfddf6000  : vmalloc & ioremap
SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Today, IMMR is mapped 1:1 at startup

Mapping IMMR 1:1 is just wrong because it may overlap with another
area. On most mpc8xx boards it is OK as IMMR is set to 0xff000000
but for instance on EP88xC board, IMMR is at 0xfa200000 which
overlaps with VM ioremap area

This patch fixes the virtual address for remapping IMMR with the fixmap
regardless of the value of IMMR.

The size of IMMR area is 256kbytes (CPM at offset 0, security engine
at offset 128k) so a 512k page is enough

Signed-off-by: Christophe Leroy <redacted>
---
v2: no change
v3: Using fixmap instead of fixed address
v4: Fix a wrong #if notified by kbuild robot
v5: no change
v6: no change
v8: no change

 arch/powerpc/include/asm/fixmap.h |  7 +++++++
 arch/powerpc/kernel/asm-offsets.c |  8 ++++++++
 arch/powerpc/kernel/head_8xx.S    | 11 ++++++-----
 arch/powerpc/mm/mmu_decl.h        |  7 +++++++
 arch/powerpc/sysdev/cpm_common.c  | 15 ++++++++++++---
 5 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 90f604b..d7dd8fb 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -51,6 +51,13 @@ enum fixed_addresses {
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
 #endif
+#ifdef CONFIG_PPC_8xx
+	/* For IMMR we need an aligned 512K area */
+	FIX_IMMR_START,
+	FIX_IMMR_TOP = (FIX_IMMR_START - 1 + ((512 * 1024) / PAGE_SIZE)) &
+		       ~(((512 * 1024) / PAGE_SIZE) - 1),
+	FIX_IMMR_BASE = FIX_IMMR_TOP - 1 + ((512 * 1024) / PAGE_SIZE),
+#endif
 	/* FIX_PCIE_MCFG, */
 	__end_of_fixed_addresses
 };
This doesn't look correct -- shouldn't the last thing in the 8xx ifdef be the
last byte of the IMMR, so that any subsequent fixmap entry would start at
the correct location?

Also, can standard alignment macros be used?

-Scott
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help