[PATCH v7 01/10] ppc64 (le): prepare for -mprofile-kernel
From: Torsten Duwe <hidden>
Date: 2016-02-04 16:20:44
Also in:
lkml
Subsystem:
function hooks (ftrace), linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Steven Rostedt, Masami Hiramatsu, Madhavan Srinivasan, Linus Torvalds
The gcc switch -mprofile-kernel, available for ppc64 on gcc > 4.8.5,
allows to call _mcount very early in the function, which low-level
ASM code and code patching functions need to consider.
Especially the link register and the parameter registers are still
alive and not yet saved into a new stack frame.
* arch/powerpc/kernel/entry_64.S:
- modify the default _mcount to be prepared for such call sites
- have the ftrace_graph_caller save function arguments before
calling its C helper prepare_ftrace_return
* arch/powerpc/include/asm/code-patching.h:
- define some common macros to make things readable.
- pull the R2 stack location definition from
arch/powerpc/kernel/module_64.c
* arch/powerpc/kernel/module_64.c:
- enhance binary code examination to handle the new patterns.
Signed-off-by: Torsten Duwe <redacted>
---
arch/powerpc/include/asm/code-patching.h | 24 ++++++++++++++++
arch/powerpc/kernel/entry_64.S | 48 +++++++++++++++++++++++++++++++-
arch/powerpc/kernel/ftrace.c | 44 ++++++++++++++++++++++-------
arch/powerpc/kernel/module_64.c | 31 +++++++++++++++++++--
4 files changed, 133 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 840a550..7820b32 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h@@ -99,4 +99,28 @@ static inline unsigned long ppc_global_function_entry(void *func) #endif } +#ifdef CONFIG_PPC64 +/* Some instruction encodings commonly used in dynamic ftracing + * and function live patching: + */ + +/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */ +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define R2_STACK_OFFSET 24 +#else +#define R2_STACK_OFFSET 40 +#endif + +/* load / store the TOC from / into the stack frame */ +#define PPC_INST_LD_TOC (PPC_INST_LD | ___PPC_RT(__REG_R2) | \ + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET) +#define PPC_INST_STD_TOC (PPC_INST_STD | ___PPC_RS(__REG_R2) | \ + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET) + +/* usually preceded by a mflr r0 */ +#define PPC_INST_STD_LR (PPC_INST_STD | ___PPC_RS(__REG_R0) | \ + ___PPC_RA(__REG_R1) | PPC_LR_STKOFF) + +#endif /* CONFIG_PPC64 */ + #endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 0d525ce..2a7313c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S@@ -1143,7 +1143,10 @@ _GLOBAL(enter_prom) #ifdef CONFIG_DYNAMIC_FTRACE _GLOBAL(mcount) _GLOBAL(_mcount) - blr + mflr r12 + mtctr r12 + mtlr r0 + bctr _GLOBAL_TOC(ftrace_caller) /* Taken from output of objdump from lib64/glibc */
@@ -1198,6 +1201,7 @@ _GLOBAL(ftrace_stub) #endif /* CONFIG_DYNAMIC_FTRACE */ #ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifndef CC_USING_MPROFILE_KERNEL _GLOBAL(ftrace_graph_caller) /* load r4 with local address */ ld r4, 128(r1)
@@ -1222,6 +1226,48 @@ _GLOBAL(ftrace_graph_caller) addi r1, r1, 112 blr +#else /* CC_USING_MPROFILE_KERNEL */ +_GLOBAL(ftrace_graph_caller) + /* with -mprofile-kernel, parameter regs are still alive at _mcount */ + std r10, 104(r1) + std r9, 96(r1) + std r8, 88(r1) + std r7, 80(r1) + std r6, 72(r1) + std r5, 64(r1) + std r4, 56(r1) + std r3, 48(r1) + mfctr r4 /* ftrace_caller has moved local addr here */ + std r4, 40(r1) + mflr r3 /* ftrace_caller has restored LR from stack */ + subi r4, r4, MCOUNT_INSN_SIZE + + bl prepare_ftrace_return + nop + + /* + * prepare_ftrace_return gives us the address we divert to. + * Change the LR to this. + */ + mtlr r3 + + ld r0, 40(r1) + mtctr r0 + ld r10, 104(r1) + ld r9, 96(r1) + ld r8, 88(r1) + ld r7, 80(r1) + ld r6, 72(r1) + ld r5, 64(r1) + ld r4, 56(r1) + ld r3, 48(r1) + + addi r1, r1, 112 + mflr r0 + std r0, LRSAVE(r1) + bctr +#endif /* CC_USING_MPROFILE_KERNEL */ + _GLOBAL(return_to_handler) /* need to save return values */ std r4, -32(r1)
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 44d4d8e..861af90 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c@@ -287,16 +287,14 @@ int ftrace_make_nop(struct module *mod, #ifdef CONFIG_MODULES #ifdef CONFIG_PPC64 +/* Examine the existing instructions for __ftrace_make_call. + * They should effectively be a NOP, and follow formal constraints, + * depending on the ABI. Return false if they don't. + */ +#ifndef CC_USING_MPROFILE_KERNEL static int -__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1) { - unsigned int op[2]; - void *ip = (void *)rec->ip; - - /* read where this goes */ - if (probe_kernel_read(op, ip, sizeof(op))) - return -EFAULT; - /* * We expect to see: *
@@ -306,8 +304,34 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) * The load offset is different depending on the ABI. For simplicity * just mask it out when doing the compare. */ - if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) { - pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]); + if ((op0 != 0x48000008) || ((op1 & 0xffff0000) != 0xe8410000)) + return 0; + return 1; +} +#else +static int +expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1) +{ + /* look for patched "NOP" on ppc64 with -mprofile-kernel */ + if (op0 != PPC_INST_NOP) + return 0; + return 1; +} +#endif + +static int +__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int op[2]; + void *ip = (void *)rec->ip; + + /* read where this goes */ + if (probe_kernel_read(op, ip, sizeof(op))) + return -EFAULT; + + if (!expected_nop_sequence(ip, op[0], op[1])) { + pr_err("Unexpected call sequence at %p: %x %x\n", + ip, op[0], op[1]); return -EINVAL; }
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 59663af..d75a25f 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c@@ -41,7 +41,6 @@ --RR. */ #if defined(_CALL_ELF) && _CALL_ELF == 2 -#define R2_STACK_OFFSET 24 /* An address is simply the address of the function. */ typedef unsigned long func_desc_t;
@@ -73,7 +72,6 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym) return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other); } #else -#define R2_STACK_OFFSET 40 /* An address is address of the OPD entry, which contains address of fn. */ typedef struct ppc64_opd_entry func_desc_t;
@@ -470,17 +468,44 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, return (unsigned long)&stubs[i]; } +#ifdef CC_USING_MPROFILE_KERNEL +static int is_early_mcount_callsite(u32 *instruction) +{ + /* -mprofile-kernel sequence starting with + * mflr r0 and maybe std r0, LRSAVE(r1). + */ + if ((instruction[-3] == PPC_INST_MFLR && + instruction[-2] == PPC_INST_STD_LR) || + instruction[-2] == PPC_INST_MFLR) { + /* Nothing to be done here, it's an _mcount + * call location and r2 will have to be + * restored in the _mcount function. + */ + return 1; + } + return 0; +} +#else +/* without -mprofile-kernel, mcount calls are never early */ +static int is_early_mcount_callsite(u32 *instruction) +{ + return 0; +} +#endif + /* We expect a noop next: if it is, replace it with instruction to restore r2. */ static int restore_r2(u32 *instruction, struct module *me) { if (*instruction != PPC_INST_NOP) { + if (is_early_mcount_callsite(instruction)) + return 1; pr_err("%s: Expect noop after relocate, got %08x\n", me->name, *instruction); return 0; } /* ld r2,R2_STACK_OFFSET(r1) */ - *instruction = 0xe8410000 | R2_STACK_OFFSET; + *instruction = PPC_INST_LD_TOC; return 1; }
--
1.8.5.6