Re: [PATCH v9 4/6] arm64, dt, thunderx: Add initial dts for Cavium Thunderx in 2 node topology.
flat view
From: David Daney <hidden>
Date: 2016-01-18 17:50:15
Also in:
linux-arch, linux-arm-kernel, linux-devicetree, linux-pci, linux-s390, linux-sh, lkml
On 01/18/2016 08:36 AM, Ganapatrao Kulkarni wrote:
Adding dt file for Cavium's Thunderx dual socket platform. Signed-off-by: Ganapatrao Kulkarni <redacted> --- arch/arm64/boot/dts/cavium/Makefile | 2 +- arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts | 83 +++ arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi | 806 ++++++++++++++++++++++++ 3 files changed, 890 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dts create mode 100644 arch/arm64/boot/dts/cavium/thunder-88xx-2n.dtsi
These files are useless, they don't contain device nodes for anything other than the UARTs. There is no existing system that has only UARTs and no other devices, so these files cannot be (and can never be) used anywhere. Since the boot firmware in all real, and emulated, systems is supplying correct DTBs, we should consider not merging these files, and removing the likewise useless thunder-88xx.dts thunder-88xx.dtsi David Daney [...]