On Tue, Jan 12, 2016 at 11:25:55AM +0100, Peter Zijlstra wrote:

On Tue, Jan 12, 2016 at 10:27:11AM +0100, Peter Zijlstra wrote:

quoted

2) the changelog _completely_ fails to explain the sync 0x11 and sync
0x12 semantics nor does it provide a publicly accessible link to
documentation that does.

Ralf pointed me at: https://imgtec.com/mips/architectures/mips64/

quoted

3) it really should have explained what you did with
smp_llsc_mb/smp_mb__before_llsc() in _detail_.

And reading the MIPS64 v6.04 instruction set manual, I think 0x11/0x12
are _NOT_ transitive and therefore cannot be used to implement the
smp_mb__{before,after} stuff.

That is, in MIPS speak, those SYNC types are Ordering Barriers, not
Completion Barriers. They need not be globally performed.

Which if true; and I know Will has some questions here; would also mean
that you 'cannot' use the ACQUIRE/RELEASE barriers for your locks as was
recently suggested by David Daney.

That is, currently all architectures -- with exception of PPC -- have
RCsc locks, but using these non-transitive things will get you RCpc
locks.

So yes, MIPS can go RCpc for its locks and share the burden of pain with
PPC, but that needs to be a very concious decision.