[net-next 02/14] freescale: remove incorrect copied comment

From: Jacob Keller <jacob.e.keller@intel.com>

The comment in question is word-for-word copied from ixgbe, and clearly
has no meaning in freescale's driver. (it even says 'return an error'
when the code clearly does not). Remove the comment as it is obviously
incorrect and not applicable to the code as it is today.

CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <redacted>
CC: <redacted>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/freescale/fec_ptp.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index a15663a..7a8386a 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c

@@ -506,12 +506,6 @@ int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr)
 		break;
 
 	default:
-		/*
-		 * register RXMTRL must be set in order to do V1 packets,
-		 * therefore it is not possible to time stamp both V1 Sync and
-		 * Delay_Req messages and hardware does not support
-		 * timestamping all packets => return error
-		 */
 		fep->hwts_rx_en = 1;
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;

-- 
2.4.3