On Tue, Jun 2, 2015 at 12:29 PM, Nikunj A Dadhania
[off-list ref] wrote:

Dinar Valeev [off-list ref] writes:

quoted

On Tue, Jun 2, 2015 at 11:47 AM, Nikunj A Dadhania
[off-list ref] wrote:

quoted

Dinar valeev [off-list ref] writes:

quoted

@@ -262,7 +258,7 @@ static void check_key_code(uint8_t *buf)
                              case 0x43:
                                      write_key(0x1b);               /* F10 */
                                      write_key(0x5b);
-                                     write_key(0x31);
+                                     write_key(0x32);
                                      write_key(0x31);
                                      write_key(0x7e);
                                      break;

Does F10 work for you? doesn't work for me ?

It does. But then menu entry is expanded to openSUSE, with Linux 4.0.1-1-default
entering edit mode and pressing f10 finally boots it.

xterm sequence is ^[[21~

I had used following in TCG:

qemu-system-ppc64 -machine pseries -m 2G -serial stdio -cdrom distro.iso \
-vnc :1

quoted

quoted

quoted

@@ -270,7 +266,7 @@ static void check_key_code(uint8_t *buf)
                              case 0x44:
                                      write_key(0x1b);               /* F11 */
                                      write_key(0x5b);
-                                     write_key(0x31);
+                                     write_key(0x32);
                                      write_key(0x33);
                                      write_key(0x7e);
                                      break;

@@ -278,7 +274,7 @@ static void check_key_code(uint8_t *buf)
                              case 0x45:
                                      write_key(0x1b);               /* F12 */
                                      write_key(0x5b);
-                                     write_key(0x31);
+                                     write_key(0x32);
                                      write_key(0x34);
                                      write_key(0x7e);
                                      break;

@@ -290,36 +286,34 @@ static void check_key_code(uint8_t *buf)
                              case 0x49:
                                      write_key(0x1b);               /* INS */
                                      write_key(0x5b);
-                                     write_key(0x31);
+                                     write_key(0x32);
                                      write_key(0x7e);
                                      break;

                              case 0x4a:
                                      write_key(0x1b);              /* HOME */
                                      write_key(0x5b);
-                                     write_key(0x32);
-                                     write_key(0x7e);
+                                     write_key(0x48);

Looking at accept.fs - handle-ESC-5b ...

: handle-ESC-5b
   key
   dup 31 = IF \ HOME
      key drop ( drops closing 7e ) handle-^A
   ELSE
      dup 33 = IF \ DEL
         key drop handle-^D
      ELSE
         dup 34 = IF \ END
            key drop handle-^E
         ELSE
            dup 1f and handle-CSI
         THEN
      THEN
   THEN drop
;


... following change is sufficient:
-                                       write_key(0x32);
+                                       write_key(0x31);

Home sequence for me is: ^[[H

Can you check the above change in your setup ?

That works as well.

quoted

quoted

quoted

                                      break;

                              case 0x4b:
                                      write_key(0x1b);              /* PgUp */
                                      write_key(0x5b);
-                                     write_key(0x33);
+                                     write_key(0x35);
                                      write_key(0x7e);
                                      break;

                              case 0x4c:
                                      write_key(0x1b);               /* DEL */
                                      write_key(0x5b);
-                                     write_key(0x34);
+                                     write_key(0x33);

Right.

quoted

                                      write_key(0x7e);
                                      break;

                              case 0x4d:
                                      write_key(0x1b);               /* END */
                                      write_key(0x5b);
-                                     write_key(0x35);
-                                     write_key(0x7e);
+                                     write_key(0x46);

I tried using: 0x34, but somehow it does not work.

^[[F works for me.

All changes are tested in openSUSE's grub2 with -vga std. Note we
don't have any special patches here..

Tested with -vga none -nographic. Home, End works with patched SLOF

Ok.

Regards
Nikunj

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev