[PATCH 13/20] powerpc/6xx/linkstation: Use pm_power_off rather than ppc_md.power_off
flat view
STALE4397d
SUPERSEDED
From: Alexander Graf <hidden>
Date: 2014-10-01 13:28:19
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
The generic power off callback is pm_power_off. Use that one rather than the powerpc specific ppc_md.power_off. Signed-off-by: Alexander Graf <redacted> --- arch/powerpc/platforms/embedded6xx/linkstation.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 455e7c08..e397e36 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c@@ -70,6 +70,8 @@ static void __init linkstation_setup_arch(void) for_each_compatible_node(np, "pci", "mpc10x-pci") linkstation_add_bridge(np); + pm_power_off = linkstation_power_off; + printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); }
@@ -158,7 +160,6 @@ define_machine(linkstation){ .show_cpuinfo = linkstation_show_cpuinfo, .get_irq = mpic_get_irq, .restart = linkstation_restart, - .power_off = linkstation_power_off, .halt = linkstation_halt, .calibrate_decr = generic_calibrate_decr, };
--
1.8.1.4