[PATCH net-next v2 6/9] gianfar: use the new fixed PHY helpers
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2014-05-22 16:48:28
Also in:
linux-devicetree, lkml, netdev
Subsystem:
freescale etsec ethernet driver (gianfar), networking drivers, the rest · Maintainers:
Claudiu Manoil, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
of_phy_connect_fixed_link() is becoming obsolete, and also required platform code to register the fixed PHYs at the specified addresses for those to be usable. Get rid of it and use the new of_phy_is_fixed_link() plus of_phy_register_fixed_link() helpers to transition over the new scheme. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- No changes in v2 drivers/net/ethernet/freescale/gianfar.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index e2d42475b006..282674027c92 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c@@ -889,6 +889,17 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) priv->phy_node = of_parse_phandle(np, "phy-handle", 0); + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ + if (of_phy_is_fixed_link(np)) { + err = of_phy_register_fixed_link(np); + if (err) + goto err_grp_init; + + priv->phy_node = np; + } + /* Find the TBI PHY. If it's not there, we don't support SGMII */ priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -1660,9 +1671,6 @@ static int init_phy(struct net_device *dev) priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0, interface); - if (!priv->phydev) - priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link, - interface); if (!priv->phydev) { dev_err(&dev->dev, "could not attach to PHY\n"); return -ENODEV;
--
1.9.1