Re: [PATCH 00/11] Add compression support to pstore
From: Aruna Balakrishnaiah <hidden>
Date: 2013-08-08 04:08:24
Also in:
lkml
Hi Tony, On Thursday 08 August 2013 03:52 AM, Tony Luck wrote:
On Tue, Aug 6, 2013 at 10:35 PM, Tony Luck [off-list ref] wrote:quoted
ERST is at the whim of the BIOS writer (the ACPI standard doesn't provide any suggestions on record sizes). My systems support ~6K record size.Off by a little - 7896 bytes on my current machine.quoted
efivars has, IIRC, a 1k limit coded in the Linux back end.My memory was correct for this one. Adding a little tracing to pstore_getrecords() I see this: pstore: inflated 3880 bytes compressed to 17459 bytes pstore: inflated 2567 bytes compressed to 17531 bytes pstore: inflated 4018 bytes compressed to 17488 bytes Which isn't at all what I expected. The ERST backend advertised a bufsize of 7896, and I have the default kmsg_bytes of 10240. So on my forced panic the code decided to create a three part pstore dump. The sum of the pieces is close to, but a little over the target of 10K. But I don't understand why the compressed sizes are so much smaller that the ERST backend block size.
The sizes of compressed text depends on the nature of uncompressed data that is captured from kmsg_dump, considering the worst case of plain text based on experiments 45% was thecompression achieved. So we chose a buffer of size psinfo->bufsize * 100/45. If the uncompressed data captured was more of plain text nature then it would take up size close to ERST backend block size. Thats the reason you see compressed data of 2.5k to 4.0k. 2.5k would have more repeated occurrences than 4.0k. The sum of 3 pstore records should not have exceeded kmsg_bytes. Is it after adding total_len in the fix patch? Will take a look at it.
The uncompressed sizes appear to be close to constant. The compression ratios vary from 14% to 23% Why do we get three small parts instead of two bigger ones close the the 7896 ERST bufsize?
Same explanation as given above.
-Tony