On 07/30/2013 04:32 PM, Wang Dongsheng-B40534 wrote:

Hi Dongsheng,

I have posted out a generic powerpc idle backend driver ccing you.
Please take a look at it and integrate your platform idle states into it.

Right now, cpu hotplug notifier is common for all powerpc. This
shouldn't hinder you.
This will reduce code duplication and would make it easier to
plug into the framework. All you need is platform specific
idle states table and config changes.

Regards,
Deepthi

quoted

-----Original Message-----
From: Daniel Lezcano [mailto:daniel.lezcano@linaro.org]
Sent: Tuesday, July 30, 2013 5:51 PM
To: Wang Dongsheng-B40534
Cc: Wood Scott-B07421; rjw@sisk.pl; benh@kernel.crashing.org; Li Yang-
R58472; Zhao Chenhui-B35336; linux-pm@vger.kernel.org; linuxppc-
dev@lists.ozlabs.org
Subject: Re: [PATCH] cpuidle: add freescale e500 family porcessors idle
support

On 07/30/2013 09:00 AM, Dongsheng Wang wrote:

quoted

From: Wang Dongsheng <redacted>

Add cpuidle support for e500 family, using cpuidle framework to manage
various low power modes. The new implementation will remain compatible
with original idle method.

Initially, this supports PW10, and subsequent patches will support
PW20/DOZE/NAP.

Signed-off-by: Wang Dongsheng <redacted>
---
This patch keep using cpuidle_register_device(), because we need to
support cpu hotplug. I will fix "device" issue in this driver, after
Deepthi Dharwar [off-list ref] add a hotplug handler
into cpuidle freamwork.

diff --git a/arch/powerpc/include/asm/machdep.h

b/arch/powerpc/include/asm/machdep.h
index 8b48090..cbdbe25 100644

--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h

@@ -271,6 +271,16 @@ extern void power7_idle(void);  extern void

ppc6xx_idle(void);  extern void book3e_idle(void);

+/* Wait for Interrupt */
+static inline void fsl_cpuidle_wait(void) { #ifdef CONFIG_PPC64
+	book3e_idle();
+#else
+	e500_idle();
+#endif
+}
+
 /*
  * ppc_md contains a copy of the machine description structure for the
  * current platform. machine_id contains the initial address where the

diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index b3fb81d..7ed114b 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig

@@ -35,6 +35,11 @@ depends on ARM
 source "drivers/cpuidle/Kconfig.arm"
 endmenu

+menu "PowerPC CPU Idle Drivers"
+depends on PPC32 || PPC64
+source "drivers/cpuidle/Kconfig.powerpc"
+endmenu
+
 endif

 config ARCH_NEEDS_CPU_IDLE_COUPLED

diff --git a/drivers/cpuidle/Kconfig.powerpc

b/drivers/cpuidle/Kconfig.powerpc

quoted

new file mode 100644
index 0000000..9f3f5ef

--- /dev/null
+++ b/drivers/cpuidle/Kconfig.powerpc

@@ -0,0 +1,9 @@
+#
+# PowerPC CPU Idle drivers
+#
+
+config PPC_E500_CPUIDLE
+	bool "CPU Idle Driver for E500 family processors"
+	depends on FSL_SOC_BOOKE
+	help
+	  Select this to enable cpuidle on e500 family processors.

diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 0b9d200..0dde3db 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile

@@ -11,3 +11,7 @@ obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE)	+= cpuidle-

calxeda.o

quoted

 obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE)	+= cpuidle-kirkwood.o
 obj-$(CONFIG_ARM_ZYNQ_CPUIDLE)		+= cpuidle-zynq.o
 obj-$(CONFIG_ARM_U8500_CPUIDLE)         += cpuidle-ux500.o
+

+########################################################################
##########

quoted

+# PowerPC platform drivers
+obj-$(CONFIG_PPC_E500_CPUIDLE)		+= cpuidle-e500.o

diff --git a/drivers/cpuidle/cpuidle-e500.c b/drivers/cpuidle/cpuidle-

e500.c

quoted

new file mode 100644
index 0000000..1919cea

--- /dev/null
+++ b/drivers/cpuidle/cpuidle-e500.c

@@ -0,0 +1,222 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * CPU Idle driver for Freescale PowerPC e500 family processors.
+ *
+ * This program is free software; you can redistribute it and/or

modify

quoted

+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Wang Dongsheng [off-list ref]
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+
+#include <asm/machdep.h>
+
+static struct cpuidle_driver e500_idle_driver = {
+	.name = "e500_idle",
+	.owner = THIS_MODULE,
+};
+
+static struct cpuidle_device __percpu *e500_cpuidle_devices;
+
+static void e500_cpuidle(void)
+{
+	/*
+	 * This would call on the cpuidle framework, and the back-end
+	 * driver to go to idle states.
+	 */
+	if (cpuidle_idle_call()) {
+		/*
+		 * On error, execute default handler
+		 * to go into low thread priority and possibly
+		 * low power mode.
+		 */
+		HMT_low();
+		HMT_very_low();
+	}
+}

Nope, this is not the place to add such function.

Thanks.

But Why not? On powerpc there is already have a cpuidle method. We need to compatible them.

Um.. arch/powerpc/platforms/xxx ?

quoted

quoted

+static int pw10_enter(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv, int index)
+{
+	fsl_cpuidle_wait();
+	return index;
+}
+
+static struct cpuidle_state fsl_pw_idle_states[] = {
+	{
+		.name = "pw10",
+		.desc = "pw10",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &pw10_enter
+	},
+};
+
+static int cpu_hotplug_notify(struct notifier_block *n,
+			unsigned long action, void *hcpu)
+{
+	unsigned long hotcpu = (unsigned long)hcpu;
+	struct cpuidle_device *dev =
+			per_cpu_ptr(e500_cpuidle_devices, hotcpu);
+
+	if (dev && cpuidle_get_driver()) {
+		switch (action) {
+		case CPU_ONLINE:
+		case CPU_ONLINE_FROZEN:
+			cpuidle_pause_and_lock();
+			cpuidle_enable_device(dev);
+			cpuidle_resume_and_unlock();
+			break;
+
+		case CPU_DEAD:
+		case CPU_DEAD_FROZEN:
+			cpuidle_pause_and_lock();
+			cpuidle_disable_device(dev);
+			cpuidle_resume_and_unlock();
+			break;
+
+		default:
+			return NOTIFY_DONE;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpu_hotplug_notifier = {
+	.notifier_call = cpu_hotplug_notify,
+};

This should go to the cpuidle framework.

Yes, I see, Deepthi will post it...
:(, This patch is relying on for Deepthi's patch about "hotplug notifier".

quoted

quoted

+
+/*
+ * e500_idle_devices_init(void)
+ * allocate, initialize and register cpuidle device
+ */
+static int e500_idle_devices_init(void)
+{
+	int i;
+	struct cpuidle_driver *drv = &e500_idle_driver;
+	struct cpuidle_device *dev;
+
+	e500_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+	if (!e500_cpuidle_devices)
+		return -ENOMEM;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(e500_cpuidle_devices, i);
+		dev->state_count = drv->state_count;
+		dev->cpu = i;
+
+		if (cpuidle_register_device(dev)) {
+			pr_err("cpuidle_register_device %d failed!\n", i);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * e500_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void e500_idle_devices_uninit(void)
+{
+	int i;
+	struct cpuidle_device *dev;
+
+	if (!e500_cpuidle_devices)
+		return;
+
+	for_each_possible_cpu(i) {
+		dev = per_cpu_ptr(e500_cpuidle_devices, i);
+		cpuidle_unregister_device(dev);
+	}
+
+	free_percpu(e500_cpuidle_devices);
+}
+
+static void e500_cpuidle_driver_init(unsigned int max_idle_state,
+		struct cpuidle_state *cpuidle_state_table)
+{
+	int idle_state;
+	struct cpuidle_driver *drv = &e500_idle_driver;
+
+	drv->state_count = 0;
+
+	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
+		if (!cpuidle_state_table[idle_state].enter)
+			break;
+
+		drv->states[drv->state_count] =

cpuidle_state_table[idle_state];

quoted

+		drv->state_count++;
+	}
+}
+
+static int cpu_is_feature(unsigned long feature)
+{
+	return (cur_cpu_spec->cpu_features == feature);
+}
+
+static int __init e500_idle_init(void)
+{
+	struct cpuidle_state *cpuidle_state_table = NULL;
+	struct cpuidle_driver *drv = &e500_idle_driver;
+	int err;
+	unsigned int max_idle_state = 0;
+
+	if (cpuidle_disable != IDLE_NO_OVERRIDE)
+		return -ENODEV;
+
+	if (cpu_is_feature(CPU_FTRS_E500MC) ||

cpu_is_feature(CPU_FTRS_E5500) ||

quoted

+			cpu_is_feature(CPU_FTRS_E6500)) {
+		cpuidle_state_table = fsl_pw_idle_states;
+		max_idle_state = ARRAY_SIZE(fsl_pw_idle_states);
+	}
+
+	if (!cpuidle_state_table || !max_idle_state)
+		return -EPERM;

Please use different drivers for each and then register the right one
instead of state count convolutions.

Then use cpuidle_register(&mydriver, NULL) and get rid of the duplicate
initialization routine.

Yes, Thanks, This patch keep using cpuidle_register_device(), because we need to
support cpu hotplug. I will fix "device" issue in this driver, after
Deepthi Dharwar [off-list ref] add a hotplug handler
into cpuidle freamwork.

quoted

quoted

+	e500_cpuidle_driver_init(max_idle_state, cpuidle_state_table);
+
+	if (!drv->state_count)
+		return -EPERM;
+
+	err = cpuidle_register_driver(drv);
+	if (err) {
+		pr_err("Register e500 family cpuidle driver failed.\n");
+
+		return err;
+	}
+
+	err = e500_idle_devices_init();
+	if (err)
+		goto out;
+
+	err = register_cpu_notifier(&cpu_hotplug_notifier);
+	if (err)
+		goto out;
+
+	ppc_md.power_save = e500_cpuidle;

This is not the place.

quoted

+
+	pr_info("e500_idle_driver registered.\n");
+
+	return 0;
+
+out:
+	e500_idle_devices_uninit();
+	cpuidle_unregister_driver(drv);
+
+	pr_err("Register e500 family cpuidle driver failed.\n");
+
+	return err;
+}
+device_initcall(e500_idle_init);

--
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev