Re: [1/1] MPC831x: fix PCI express probing

For MPC831x the bus probing function also needs the fixup to assign
addresses to the PCI devices as it was for MPC85xx and MPC86xx.
The fixup of the bridge vendor and device ID should be done early in
PCI probing. Else the bridge is not detected as FIXUP_HEADER is called
too late.

Signed-off-by: Sergey Gerasimov <redacted>

---
arch/powerpc/sysdev/fsl_pci.c | 68 +++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 028ac1f..94d1bd4 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c

@@ -84,6 +84,34 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
 	return 0;
 }
 
+void fsl_pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+	int i;
+
+
+	if ((bus->parent == hose->bus)
+		&& ((fsl_pcie_bus_fixup
+			&& pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP))
+			|| (hose->indirect_type
+				& PPC_INDIRECT_TYPE_NO_PCIE_LINK))) {
+		for (i = 0; i < 4; ++i) {
+			struct resource *res = bus->resource[i];
+			struct resource *par = bus->parent->resource[i];
+			if (res) {
+				res->start = 0;
+				res->end   = 0;
+				res->flags = 0;
+			}
+			if (res && par) {
+				res->start = par->start;
+				res->end   = par->end;
+				res->flags = par->flags;
+			}
+		}
+	}
+}