On Jan 23, 2013, at 2:13 PM, Paul Gortmaker wrote:

Updates to u-boot allow this board to boot off of either
the 8MB soldered on flash, or the 64MB SODIMM flash.
=20
This is achieved by changing JP12 and SW2.8 which in turn
swaps which flash device appears on /CS0 and /CS6 respectively.
=20
Since the flash devices are not the same size, this also
changes the MTD memory map layout on the local bus.
=20
Here we split the common chunks out into a pre and post
include, so they can be reused by an upcoming "alternative
boot" dts file; leaving only the local bus chunk behind.
=20
No content changes are made at this point - it is just purely
the move to using include files.
=20
Signed-off-by: Paul Gortmaker <redacted>
---
arch/powerpc/boot/dts/sbc8548-post.dtsi | 295 =

+++++++++++++++++++++++++++++

arch/powerpc/boot/dts/sbc8548-pre.dtsi  |  52 ++++++
arch/powerpc/boot/dts/sbc8548.dts       | 322 =

+-------------------------------

3 files changed, 351 insertions(+), 318 deletions(-)
create mode 100644 arch/powerpc/boot/dts/sbc8548-post.dtsi
create mode 100644 arch/powerpc/boot/dts/sbc8548-pre.dtsi

applied 1-4 to next

- k=