On 12/10/2012 03:26 PM, Rob Herring wrote:

On 12/10/2012 06:20 AM, Michal Simek wrote:

quoted

Hi Grant and others,

I have a question regarding number of cells in ranges property
for pci and pcie nodes.

Linux pci/pcie powerpc DTSes contain 7 cells (xpedite5370.dts,
sequoia.dts, etc)
but also 6 cells format too (mpc832x_mds.dts)

Here is shown 6 cells ranges format and describe
http://devicetree.org/Device_Tree_Usage#PCI_Host_Bridge

And also in documentation in the linux
Documentation/devicetree/bindings/pci/83xx-512x-pci.txt

Both format uses:
#size-cells = <2>;
#address-cells = <3>;

What is valid format?

Both. 7 cells are valid when the host (parent) bus is 64-bit and 6 cells
are valid when the host bus is 32-bit. The ranges property is <<child
address> <parent address> <size>>. The parent address #address-cells is
taken from the parent node.

Ok. Got it.

Here is what we use on zynq and microblaze - both 32bit which should be fine.

	ps7_axi_interconnect_0: axi@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		axi_pcie_0: axi-pcie@50000000 {
			#address-cells = <3>;
			#size-cells = <2>;
			compatible = "xlnx,axi-pcie-1.05.a";
			ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
			...
		}
	}

What I am wondering is pci_process_bridge_OF_ranges() at arch/powerpc/kernel/pci-common.c
where there are used some hardcoded values which should be probably loaded from device-tree.

For example:
683         int np = pna + 5;
...
702                 pci_addr = of_read_number(ranges + 1, 2);
703                 cpu_addr = of_translate_address(dev, ranges + 3);
704                 size = of_read_number(ranges + pna + 3, 2);


Unfortunately we have copied it to microblaze.

Thanks,
Michal






-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian