Upstream patch status?? (v3.6-rc1 out)

Guys,

As v3.6-rc1 is now out we really need to get some of these simpler patches =
upstream and accepted NOW.  Please provide status updates if the patch is u=
pstream already let me know.

[P1025RDB] (some major differences between upstream and internal P1025RDB s=
upport)
powerpc/85xx: Add Quicc Engine support for p1025rdb	P1025RDB		Zhicheng Fan
powerpc/dts: Add ucc uart support for p1025rdb	P1025RDB		Zhicheng Fan
powerpc/dts: Add dts for p1025rdb board	P1025RDB		Zhicheng Fan

[P1022DS] (this is trivial, please take 10m and get this updated and submit=
ted)
powerpc/mpc85xx: p1022ds support the MTD for NOR and NAND flash	P1022DS		Je=
rry Huang

[DTS] (Stuart, can you help and close)
powerpc/e5500: Add power isa properties to comply with ePAPR 1.1	EPAPR		Liu=
 Yu
powerpc/e500mc: Add power isa properties to comply with ePAPR 1.1	EPAPR		Li=
u Yu
powerpc/e500v2: Add power isa properties to comply with ePAPR 1.1	EPAPR		Li=
u Yu

[MSI] (I think upstream, Timur please verify)
powerpc/fsl: add MSI support for the Freescale hypervisor	KVM/HV		Timur Tab=
i

[CORE]
powerpc/booke: Re-organize debug code	CORE		Kumar Gala

[USB] (Again, this is trivial and spend 10m and send upstream)
usb/fsl: fixed USB wakeup	USB		Zhao Chenhui

[LBC]
mtd: elbc nand: use drvdata to only remove the relevant chip	LBC		Scott Woo=
d

[SATA]
libata-pmp: add schedule timeout to support some PMP cards	SATA		Jerry Huan=
g
fsl-sata: workaround to fix the exception of link layer	SATA		Qiang Liu

- k=