[PATCH 2/2][v2] powerpc/perf: Sample only if SIAR-Valid bit is set in P7+

@@ -49,6 +49,7 @@ struct power_pmu {
 #define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
 #define PPMU_NO_SIPR		4	/* no SIPR/HV in MMCRA at all */
 #define PPMU_NO_CONT_SAMPLING	8	/* no continuous sampling */
+#define PPMU_SIAR_VALID		16	/* Processor has SIAR Valid bit */
 
 /*
  * Values for flags to get_alternatives()

@@ -601,6 +601,10 @@
 #define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
 #define   POWER6_MMCRA_THRM	0x00000020UL
 #define   POWER6_MMCRA_OTHER	0x0000000EUL
+
+#define   POWER7P_MMCRA_SIAR_VALID 0x10000000	/* P7+ SIAR contents valid */
+#define   POWER7P_MMCRA_SDAR_VALID 0x08000000	/* P7+ SDAR contents valid */
+
 #define SPRN_PMC1	787
 #define SPRN_PMC2	788
 #define SPRN_PMC3	789

@@ -103,14 +103,20 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
  * If we're not doing instruction sampling, give them the SDAR
  * (sampled data address).  If we are doing instruction sampling, then
  * only give them the SDAR if it corresponds to the instruction
- * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
- * bit in MMCRA.
+ * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or
+ * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA.
  */
 static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
 {
 	unsigned long mmcra = regs->dsisr;
-	unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
-		POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+	unsigned long sdsync;
+
+	if (ppmu->flags & PPMU_SIAR_VALID)
+		sdsync = POWER7P_MMCRA_SDAR_VALID;
+	else if (ppmu->flags & PPMU_ALT_SIPR)
+		sdsync = POWER6_MMCRA_SDSYNC;
+	else
+		sdsync = MMCRA_SDSYNC;
 
 	if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
 		*addrp = mfspr(SPRN_SDAR);

@@ -1248,6 +1254,25 @@ struct pmu power_pmu = {
 	.event_idx	= power_pmu_event_idx,
 };
 
+
+/*
+ * On processors like P7+ that have the SIAR-Valid bit, marked instructions
+ * must be sampled only if the SIAR-valid bit is set.
+ *
+ * For unmarked instructions and for processors that don't have the SIAR-Valid
+ * bit, assume that SIAR is valid.
+ */
+static inline int siar_valid(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+	int marked = mmcra & MMCRA_SAMPLE_ENABLE;
+
+	if ((ppmu->flags & PPMU_SIAR_VALID) && marked)
+		return mmcra & POWER7P_MMCRA_SIAR_VALID;
+
+	return 1;
+}
+
 /*
  * A counter has overflowed; update its count and record
  * things if requested.  Note that interrupts are hard-disabled

@@ -1281,7 +1306,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			left += period;
 			if (left <= 0)
 				left = period;
-			record = 1;
+			record = siar_valid(regs);
 			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)

@@ -1340,6 +1365,9 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs)
 	    !(mmcra & MMCRA_SAMPLE_ENABLE))
 		return regs->nip;
 
+	if (!siar_valid(regs))
+		return 0;	// no valid instruction pointer
+
 	return mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
 }
 

@@ -373,6 +373,9 @@ static int __init init_power7_pmu(void)
 	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
 		return -ENODEV;
 
+	if (__is_processor(PV_POWER7p))
+		power7_pmu.flags |= PPMU_SIAR_VALID;
+
 	return register_power_pmu(&power7_pmu);
 }