[PATCH 3/3] serial/8250: delete WR SBC850 UART quirk handling
flat view
STALE5223d
From: Paul Gortmaker <hidden>
Date: 2012-06-26 19:55:03
Also in:
linux-serial
Subsystem:
8250/16?50 (and clone uarts) serial driver, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Linus Torvalds, Jiri Slaby
We've are dropping the support for the EOL SBC8560, so we can also delete this variant of the Alpha quirk support. Cc: Alan Cox <redacted> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Paul Gortmaker <redacted> --- drivers/tty/serial/8250/8250.h | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index f9719d1..ffd1e6e 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h@@ -119,13 +119,6 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value) * is cleared, the machine locks up with endless interrupts. */ #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) -#elif defined(CONFIG_SBC8560) -/* - * WindRiver did something similarly broken on their SBC8560 board. The - * UART tristates its IRQ output while OUT2 is clear, but they pulled - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) #else #define ALPHA_KLUDGE_MCR 0 #endif
--
1.7.9.1