Re: [PATCH v3 3/4] powerpc: Move GE PIC drivers
flat view
From: Kumar Gala <hidden>
Date: 2012-03-16 16:20:58
Also in:
lkml
On Mar 12, 2012, at 12:12 PM, Martyn Welch wrote:
Move the GE PIC drivers to allow these to be used by non-86xx boards.
Signed-off-by: Martyn Welch <redacted>
---
v2: Move GPIO and PIC drivers to sysdev/ge/ rather than platforms/.
v3: Now just PIC driver. GPIO driver going to drivers/gpio.
arch/powerpc/platforms/86xx/Kconfig | 4 ----
arch/powerpc/platforms/86xx/Makefile | 1 -
arch/powerpc/platforms/86xx/gef_ppc9a.c | 2 +-
arch/powerpc/platforms/86xx/gef_sbc310.c | 2 +-
arch/powerpc/platforms/86xx/gef_sbc610.c | 2 +-
arch/powerpc/sysdev/Kconfig | 4 ++++
arch/powerpc/sysdev/Makefile | 2 ++
arch/powerpc/sysdev/ge/Makefile | 1 +
.../86xx/gef_pic.c => sysdev/ge/ge_pic.c} | 2 +-
.../86xx/gef_pic.h => sysdev/ge/ge_pic.h} | 0
10 files changed, 11 insertions(+), 9 deletions(-)
create mode 100644 arch/powerpc/sysdev/ge/Makefile
rename arch/powerpc/{platforms/86xx/gef_pic.c => sysdev/ge/ge_pic.c} (99%)
rename arch/powerpc/{platforms/86xx/gef_pic.h => sysdev/ge/ge_pic.h} (100%)applied - k