On Feb 28, 2012, at 4:22 AM, Martyn Welch wrote:

Move the GE GPIO and PIC drivers to allow these to be used by non-86xx
boards.
=20
Signed-off-by: Martyn Welch <redacted>
---
=20
v2: Move GPIO and PIC drivers to sysdev/ge/ rather than platforms/.
=20
arch/powerpc/platforms/86xx/Kconfig                |    3 +++
arch/powerpc/platforms/86xx/Makefile               |    7 +++----
arch/powerpc/platforms/86xx/gef_ppc9a.c            |    2 +-
arch/powerpc/platforms/86xx/gef_sbc310.c           |    2 +-
arch/powerpc/platforms/86xx/gef_sbc610.c           |    2 +-
arch/powerpc/sysdev/Kconfig                        |    7 +++++++
arch/powerpc/sysdev/Makefile                       |    2 ++
arch/powerpc/sysdev/ge/Makefile                    |    2 ++
.../86xx/gef_gpio.c =3D> sysdev/ge/ge_gpio.c}        |    2 +-
.../86xx/gef_pic.c =3D> sysdev/ge/ge_pic.c}          |    2 +-
.../86xx/gef_pic.h =3D> sysdev/ge/ge_pic.h}          |    0
drivers/watchdog/Kconfig                           |    2 +-
12 files changed, 23 insertions(+), 10 deletions(-)
create mode 100644 arch/powerpc/sysdev/ge/Makefile
rename arch/powerpc/{platforms/86xx/gef_gpio.c =3D> =

sysdev/ge/ge_gpio.c} (98%)

rename arch/powerpc/{platforms/86xx/gef_pic.c =3D> sysdev/ge/ge_pic.c} =

(99%)

rename arch/powerpc/{platforms/86xx/gef_pic.h =3D> sysdev/ge/ge_pic.h} =

(100%)

gpio driver should be in drivers/gpio.  Please split that move out as a =
separate patch for Grant & Linus to review as part of the GPIO subsystem

- k=