Re: Boot failure with next-20120208

On 2/12/2012 7:04 PM, Michael Neuling wrote:

quoted

Just a quick note to say I got a boot OOPs with next-20120208 and 9 on a
Power7 blade (my other PowerPC boot tests are ok.  I'll investigate this
further on Monday.

The line referenced below is:

BUG_ON(!kobj || !kobj->sd || !attr);

in sysfs_create_file().

calling  .topology_init+0x0/0x1ac @ 1
initcall 7_.async_cpu_up+0x0/0x40 returned 0 after 9765 usecs
async_continuing @ 20 after 9765 usec
------------[ cut here ]------------
kernel BUG at fs/sysfs/file.c:573!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=32 NUMA pSeries
Modules linked in:
NIP: c00000000024a35c LR: c0000000004ee050 CTR: c00000000083ca24
REGS: c0000003fd9e7560 TRAP: 0700   Not tainted  (3.3.0-rc2-autokern1)
MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 88002082  XER: 0000000f
CFAR: c00000000024a370
TASK = c0000003fd9e8000[20] 'kworker/u:6' THREAD: c0000003fd9e4000 CPU: 0
GPR00: 0000000000000001 c0000003fd9e77e0 c000000000d19bb8 0000000000000000 
GPR04: c000000000bf37a8 0000000000000008 8000000002096400 0000000000000000 
GPR08: 0000000000000000 c000000000f80028 c000000000d52bd8 0000000000000000 
GPR12: 0000000048002088 c00000000f33b000 0000000001affa78 00000000009aa000 
GPR16: 0000000000e1f3c8 0000000002d517f0 0000000001aff984 0000000000000060 
GPR20: 0000000000000000 ffffffffffffffff 0000000000000000 c000000000c45128 
GPR24: 0000000000000000 0000000000000008 0000000000000000 c000000000c44200 
GPR28: c000000000f80028 0000000000000008 c000000000c85038 0000000000000002 
NIP [c00000000024a35c] .sysfs_create_file+0x1c/0x40
LR [c0000000004ee050] .device_create_file+0x20/0x40
Call Trace:
[c0000003fd9e77e0] [c0000003fd9e78a0] 0xc0000003fd9e78a0 (unreliable)
[c0000003fd9e7850] [c00000000083c9a4] .register_cpu_online+0x1d0/0x250
[c0000003fd9e7900] [c00000000083ca8c] .sysfs_cpu_notify+0x68/0x28c
[c0000003fd9e79b0] [c00000000083769c] .notifier_call_chain+0x9c/0x100
[c0000003fd9e7a50] [c0000000000a5878] .__cpu_notify+0x38/0x80
[c0000003fd9e7ad0] [c00000000083e124] ._cpu_up+0x10c/0x178
[c0000003fd9e7b90] [c00000000083e2c8] .cpu_up+0x138/0x164
[c0000003fd9e7c20] [c000000000ba46d0] .async_cpu_up+0x28/0x40
[c0000003fd9e7ca0] [c0000000000d81ec] .async_run_entry_fn+0xbc/0x1f0
[c0000003fd9e7d50] [c0000000000c7cbc] .process_one_work+0x19c/0x590
[c0000003fd9e7e10] [c0000000000c8618] .worker_thread+0x188/0x4b0
[c0000003fd9e7ed0] [c0000000000ce57c] .kthread+0xbc/0xd0
[c0000003fd9e7f90] [c000000000021448] .kernel_thread+0x54/0x70
Instruction dump:
7fa3eb78 ebe1fff8 eba1ffe8 7c0803a6 4e800020 2c230000 41820024 e8630030 
7c800074 7800d182 2fa30000 419e0014 <0b000000> 38a00002 4bfffebc e8630030 
---[ end trace 31fd0ba7d8756001 ]---
initcall .topology_init+0x0/0x1ac returned 0 after 0 usecs
calling  .pcibios_init+0x0/0xe8 @ 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware done
initcall .pcibios_init+0x0/0xe8 returned 0 after 0 usecs
calling  .add_system_ram_resources+0x0/0x140 @ 1
initcall .add_system_ram_resources+0x0/0x140 returned 0 after 0 usecs
calling  .__machine_initcall_powermac_pmac_i2c_create_platform_devices+0x0/0xc8 @ 1
initcall .__machine_initcall_powermac_pmac_i2c_create_platform_devices+0x0/0xc8 returned 0 after 0 usecs
calling  .opal_init+0x0/0x1cc @ 1
opal: Node not found
initcall .opal_init+0x0/0x1cc returned -19 after 0 usecs
calling  .__machine_initcall_pseries_ioei_init+0x0/0xa0 @ 1

Reverting "smp: start up non-boot CPUs asynchronously" (8de7a96405 from
next-20120208) fixes this problem for me.  

if that fixes it, it means PPC has a race somewhere in the cpu hotplug
code, since all the patch does is hotplug the cpus one by one (which the
normal kernel also does, just not in parallel with other work)