Shawn,
On 01/31/2012 06:45 AM, Shawn Guo wrote:
On Fri, Jan 27, 2012 at 02:36:08PM -0700, Grant Likely wrote:
quoted
irq_domain_add_simple() was a stop-gap measure until complete irq_domain
support was complete. This patch removes the irq_domain_add_simple()
interface.
v2: Updated to pass in host_data pointer on irq_domain allocation.
Signed-off-by: Grant Likely <redacted>
Cc: Rob Herring <redacted>
Cc: Thomas Gleixner <redacted>
Cc: Milton Miller <redacted>
---
arch/arm/mach-imx/mach-imx6q.c | 3 ++-
arch/arm/mach-msm/board-msm8x60.c | 8 ++------
arch/arm/mach-mx5/imx51-dt.c | 4 ++--
arch/arm/mach-mx5/imx53-dt.c | 4 ++--
arch/arm/mach-omap2/board-generic.c | 2 +-
arch/arm/mach-prima2/irq.c | 2 +-
drivers/mfd/twl-core.c | 2 +-
include/linux/irqdomain.h | 1 -
kernel/irq/irqdomain.c | 10 ++--------
9 files changed, 13 insertions(+), 23 deletions(-)
...
quoted
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
static int __init imx51_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- irq_domain_add_simple(np, 0);
+ irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
- irq_domain_add_simple(np, gpio_irq_base);
+ irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
The tzic on imx5 gets 128 irq lines rather than 32 here. The current
code will make any hwirq that is > 32 hit the WARN_ON below in
irq_domain_legacy_revmap().
But this is the gpio controller code? Really this should be 4 domains,
but this temp fix is probably fine until you use my generic irq chip
support.
Rob
WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size)
The first_hwirq is 0 and size is 32 in this case.
Changing 32 to 128 seems fixing the problem.