Re: Kernel not booting when supplying boot parameter mem

Arshad, Farrukh wrote:

Hi Tiejun,

Thanks for your response. Yes, I am running two kernels one on each core in SAMP configuration on P1022RDK board. Given is my memory partitioning. Core 0 is loading fine but Core 1 is not loading. CONFIG_RELOCATABLE is not set.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Core                      	| Base Address  	|    Size                 			| Uboot parameters					| Kernel Configuration									|
-----------------------------|---------------------------|-------------------------------------|------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------|
Core 0 (MEL RT Kernel) 	| 0x0000,0000   		| 0x1000,0000 - 256 (MB)   	|bootm_low = 0x0000,0000, bootm_size = 0x1000,0000	| CONFIG_PHYSICAL_START = 0x0000,0000, CONFIG_KERNEL_START = 0xC000,0000	|
Core 1 (LTIB Kernel)      	|0x1000,0000    		| 0x0800,0000 - 128 (MB)   	|bootm_low = 0x1000,0000, bootm_size = 0x0800,0000	| CONFIG_PHYSICAL_START = 0x1000,0000, CONFIG_KERNEL_START = 0xC000,0000	|
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Please check if the following commit is already in your kernel:
------
    powerpc: Fix memory limits when starting at a non-zero address

    memblock_enforce_memory_limit() takes the desired maximum quantity of memory
    to end up with, not an address above which memory will not be used.

Tiejun