Re: [RFC PATCH 00/17] powerpc/e500: separate e500 from e500mc

On Nov 10, 2011, at 08:59, Kumar Gala wrote:

On Nov 9, 2011, at 6:03 PM, Kyle Moffett wrote:

quoted

I saw Baruch Siach's patch:
powerpc: 85xx: separate e500 from e500mc
=20
Unfortunately, that patch breaks the dependencies for the P5020DS
platform and does not fix the underlying code which does not
understand what the ambiguous "CONFIG_E500" means.
=20
In order to fix the issue at the fundamental level, I created the
following 17-patch series loosely based on Baruch's patch.
=20
=3D=3D=3D High-Level Summary =3D=3D=3D
=20
The e500v1/v2 and e500mc/e5500 CPU families are not compatible with
each other, yet they share the same "CONFIG_E500" Kconfig option.
=20
The following patch series splits the 32-bit CPU support into two
separate options: "CONFIG_FSL_E500_V1_V2" and "CONFIG_FSL_E500MC".
Additionally, the 64-bit e5500 support is separated to its own config
option ("CONFIG_FSL_E5500") which is automatically combined with
either 32-bit e500MC or 64-bit Book-3E when the P5020DS board support
is enabled.

=20
So its clear from the community that there is confusion here and we
need to clean this up.  I guess my attempt to support an kernel that
ran on both E500v2 and E500mc isn't worth it.  However I don't want to
completely remove the ability to do this.

Well, a kernel built with CONFIG_PPC_E500MC today appears to be
fundamentally broken on E500v1/E500v2:

#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
#define L1_CACHE_SHIFT		4
#define MAX_COPY_PREFETCH	1
#elif defined(CONFIG_PPC_E500MC)
#define L1_CACHE_SHIFT		6
#define MAX_COPY_PREFETCH	4
#elif defined(CONFIG_PPC32)
#define MAX_COPY_PREFETCH	4
#if defined(CONFIG_PPC_47x)
#define L1_CACHE_SHIFT		7
#else
#define L1_CACHE_SHIFT		5
#endif
#else /* CONFIG_PPC64 */
#define L1_CACHE_SHIFT		7
#endif

E500MC will set L1_CACHE_SHIFT to 6, while regular E500 appears to
want it set to 5.  I don't know if that's a mistake or exactly what
code that affects, but it looks very wrong.

Furthermore, it looks like there are a couple issues here I missed
before.  PPC64 systems all appear to have an L1_CACHE_SHIFT of 7,
except when you turn on the P5020DS board option which magically
changes it to "6" and breaks lord-knows-what.  I think my patch
series actually "breaks" that and makes e5500 use 7 as well.

Are you sure that a kernel built to support E5500 can also run on
other 64-bit PowerPC/POWER systems?

Towards the cleanup I'd ask for a proposal on what exactly the
CONFIG_ options we'd end up with would be and their meaning.
So today we have:
=20
CONFIG_E500
CONFIG_PPC_E500MC

It's actually a bit more complicated than that.  There are 3 ways
that the user can configure an e500 kernel today.  I'm omitting
the "FSL_SOC_BOOKE" menu that wraps around all of the 85xx/e5500
boards today, because that is set for all of these platforms:

  * PPC32 + PPC_85xx + E500 [+ boards]
  * PPC64 + BOOK3E_64 + P5020_DS (which adds E500 and PPC_E500MC)

Note that whether or not "PPC_E500MC" is set on PPC32 depends
only on which boards the user picked.  So if I am trying to
build an e500v2 kernel and I accidentally also turn on support
for one of the e500mc boards, my kernel mysteriously breaks.

What do we want to move to?  I want to keep the builds such that we
have only 2 classes:  e500V1/V2 and e500mc/e5500/e6500/.../eX500.
I see no reason to hyper-optimize e500mc vs e5500 vs e6500.

So after my changes, there are the following user-configurable
option sets:
  * PPC32 + FSL_E500_V1_V2 [+ e500v1/v2 boards]
  * PPC32 + FSL_E500MC     [+ e500mc boards]
  * PPC64 + BOOK3E_64 + P5020_DS (which adds FSL_E5500)

Since most of the "e500mc"-specific code was in 32-bit-only ASM
or inside of #ifdef PPC32, the new FSL_E500MC option is only
set on 32-bit builds, even if it is running in compat mode on
64-bit e5500 hardware)

Internally the P5020_DS option turns on the hidden FSL_E5500
option for both 32-bit and 64-bit; that config option enables
platform drivers and similar stuff.

Depending on how compatible the AMP processors are, you could
rename the option to be "FSL_E5X00" or add a hidden option for
"FSL_E6500" that is also selected by appropriate boards.

Please let me know if you think!

Cheers,
Kyle Moffett

--
Curious about my work on the Debian powerpcspe port?
I'm keeping a blog here: http://pureperl.blogspot.com/