This patch was obsolete, please see http://linux.freescale.net/patchwork/pa=
tch/12224/ posted on Sep 9.

-----Original Message-----
From: Tabi Timur-B04825
Sent: Thursday, September 15, 2011 5:18 AM
To: Kumar Gala
Cc: linuxppc-dev@ozlabs.org; Liu Shengzhou-B36685
Subject: Re: [PATCH 3/4] powerpc/p3060qds: Add support for P3060QDS board
=20
On Thu, Sep 1, 2011 at 2:26 PM, Kumar Gala [off-list ref]
wrote:
=20

quoted

+ =A0 =A0 =A0 localbus@ffe124000 {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0xf 0xfe124000 0 0x1000>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 ranges =3D <0 0 0xf 0xe8000000 0x08000000=

;

quoted

+
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 flash@0,0 {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "cfi-flash=

";

quoted

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0 0 0x08000000>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 bank-width =3D <2>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 device-width =3D <2>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 };
+
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 nand@2,0 {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <1>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <1>;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,elbc-=

fcm-nand";

quoted

+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x2 0x0 0x40000>=

;

=20
The 'ranges' property is missing a line for the NAND device.  You need
something like this:
=20
               ranges =3D <0 0 0xf 0xe8000000 0x08000000
     			       2 0 0xf 0xffa00000 0x00040000>;
=20
I don't know if these are the right numbers, but the "2" line is missing.
=20
--
Timur Tabi
Linux kernel developer at Freescale