[PATCH] powerpc/p1022ds: Remove fixed-link property from ethernet nodes.

On P1022DS both ethernet controllers are connected to RGMII PHYs
accessible via MDIO bus. Remove fixed-link property from ethernet
nodes as they only required when fixed link PHYs without MDIO bus
are used.

Signed-off-by: Felix Radensky <redacted>
---
 arch/powerpc/boot/dts/p1022ds.dts |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 98d9426..1be9743 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts

@@ -412,7 +412,6 @@
 			fsl,magic-packet;
 			fsl,wake-on-filer;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			fixed-link = <1 1 1000 0 0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 			queue-group@0{

@@ -439,7 +438,6 @@
 			fsl,num_rx_queues = <0x8>;
 			fsl,num_tx_queues = <0x8>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			fixed-link = <1 1 1000 0 0>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 			queue-group@0{

-- 
1.7.4.4

Felix Radensky wrote:

On P1022DS both ethernet controllers are connected to RGMII PHYs
accessible via MDIO bus. Remove fixed-link property from ethernet
nodes as they only required when fixed link PHYs without MDIO bus
are used.

Signed-off-by: Felix Radensky <redacted>

Acked-by: Timur Tabi <redacted>

Ethernet works before and after applying this patch, so all I can say is that it
doesn't break anything.

-- 
Timur Tabi
Linux kernel developer at Freescale

On Jul 7, 2011, at 2:37 AM, Felix Radensky wrote:

On P1022DS both ethernet controllers are connected to RGMII PHYs
accessible via MDIO bus. Remove fixed-link property from ethernet
nodes as they only required when fixed link PHYs without MDIO bus
are used.

Signed-off-by: Felix Radensky <redacted>
---
arch/powerpc/boot/dts/p1022ds.dts |    2 --
1 files changed, 0 insertions(+), 2 deletions(-)

applied to next