Re: [PATCH 1/2] Maple: register CPC925 EDAC device on all boards with CPC925

Currently Maple setup code creates cpc925_edac device only on
Motorola ATCA-6101 blade. Make setup code check bridge revision
and enable EDAC on all U3 bridges.

But the EDAC code only works on U3H (CPC925), not old U3.

+	if ((rev & 0xf0) != 0x30) { /* U3 */
+		printk(KERN_ERR "%s: Non-CPC925(U3) bridge revision: %02x\n",

Should be:  if (rev >= 0x34 && rev <= 0x3f)


Segher