Re: [PATCH v10 09/10] USB/ppc4xx:Synopsys DWC OTG driver enable gadget support
From: Sergei Shtylyov <hidden>
Date: 2011-03-29 11:55:02
Hello. On 28-03-2011 22:28, tmarri@apm.com wrote:
From: Tirumala Marri <redacted>
Enable gadget support
Signed-off-by: Tirumala R Marri <redacted> Signed-off-by: Fushen Chen <redacted> Signed-off-by: Mark Miesfeld <redacted>
[...]
quoted hunk ↗ jump to hunk
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index bc5123c..61aca75 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig@@ -365,6 +365,28 @@ config USB_GADGET_MUSB_HDRC This OTG-capable silicon IP is used in dual designs including the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin +# dwc_otg builds in ../dwc_otg along with host support
There's no ../dwc_otg any longer.
+config USB_GADGET_DWC_HDRC + boolean "DesignWare USB Peripheral" + depends on DWC_OTG_MODE || DWC_DEVICE_ONLY + select USB_GADGET_DUALSPEED + select USB_GADGET_SELECTED + select USB_GADGET_DWC_OTG + help + This OTG-capable Designware USB IP + +config USB_GADGET_DWC_OTG + boolean "OTG Support" + depends on USB_GADGET_DWC_HDRC
Not on DWC_OTG_MODE? How this option is different from DWC_OTG_MODE?
+ help + The most notable feature of USB OTG is support for a + "Dual-Role" device, which can act as either a device + or a host. The initial role choice can be changed + later, when two dual-role devices talk to each other. + Select this only if your board has a Mini-AB connector. + + +
Too many empty lines.
config USB_GADGET_M66592 boolean "Renesas M66592 USB Peripheral Controller" select USB_GADGET_DUALSPEED
WBR, Sergei