On Wed, 2010-01-13 at 10:18 +1100, Benjamin Herrenschmidt wrote:

On Tue, 2010-01-12 at 15:09 +0100, Stef van Os wrote:

quoted

This patch adds type 1 PCI transactions to 4xx PCI code, enabling the
discovery of
devices behind a PCI bridge.

Your patch appears word wrapped and whitespace damaged...

I'll fix it up manually this time around but please check your mailer
setup :-)

Allright, it's not quite that.

I've looked at my docs, and it looks like older parts such as the 440EP
do -not- take the config type in the low bit.

More interestingly, they only generate config 0 cycles if you pass a bus
number of 0 :-)

So we'll need do do something a little bit different here. We probably
need to indicate in the device-tree what kind of SoC we have (whether
it supports the explicit bit to choose between type 0 and type 1 or
not).

If not, we should then set the "self_busno" field of the bridge to 0,
causing indirect_pci to always use bus number 0 when trying to talk
to the bus segment behind the bridge, whatever the linux bus number
for it actually is.

Now, we need to make a precise list here of what SoC uses what. 460xx
seem to all support the explicit bit. 440EP doesn't. What else ?

Somebody from AMCC can dbl check that ?

Cheers,
Ben.