Re: [PATCH 3/3] powerpc/85xx: Add QE USB support for MPC8569E-MDS boards

On Aug 18, 2009, at 6:28 PM, Anton Vorontsov wrote:

- Add gpio-controller node for BCSR17, it is used to control USB
 speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
     pilot boards if specs and schematics are correct, though we
     don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <redacted>
---
arch/powerpc/boot/dts/mpc8569mds.dts      |   45 ++++++++++++++++++++ 
+++++++++
arch/powerpc/platforms/85xx/mpc85xx_mds.c |    4 ++
2 files changed, 49 insertions(+), 0 deletions(-)

applied to next.

- k