Re: Make bridge bug in linux 2.6.25b using Powerpc 405ep
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2009-06-21 22:39:29
On Sun, 2009-06-21 at 11:45 +0800, zhong wang wrote:
hello all:
I encountered a very strange question, I am using the AMCC
Powerpc 405ep its Emac0 received a single phy intel 971, Emac1
received RTL8305SB, they shared Mdio, Mdc. 2.6.25.10 I use
the kernel.
The problem is to use the following command will be eth0,
eth1 configured bridge .my borad will down often. Hope that
helps!
(Please use plain text emails) When you say that your board is down, this lacks specifics about what exactly happens. Also, do you have a HW debugger such as an abatron BDI or a RiscWatch connected to it ? If it's hung, that would help finding out where. Cheers, Ben.
______________________________________________________________________ 好玩贺卡等你发，邮箱贺卡全新上线！ _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev