Re: [PATCH] [PowerPC] MPC8272ADS: fix device tree for 8 MB flash size

On May 12, 2009, at 2:06 PM, Wolfgang Denk wrote:

The current device tree for the MPC8272ADS assumes a mapping of 32 MB
of NOR flash at 0xFE00.0000, while there are actually only 8 MB on
the boards, mapped at 0xFF80.0000. When booting an uImage with such a
device tree, the kernel crashes because 0xFE00.0000 is not mapped.

Also introduce aliases for serial[01] and ethernet[01].

Signed-off-by: Wolfgang Denk <redacted>
Cc: Scott Wood <redacted>
cc: Kumar Gala <redacted>
---
I am not really sure what the typical flash size on MPC8272ADS boards
is. The board I used for testing is marked as "Prototype", so it may
not be the release configuration. On the other hand, the manual also
says 8 MB, Vitaly Borduk confirms 8 MB on his board, too, and Scott
Wood eventually tested only with cuImage which fixes up the localbus
mappings, thus eventually concealing the issue.

I'm posting this as reference in case the 8 MB should turn out to be
correct. -- wd

arch/powerpc/boot/dts/mpc8272ads.dts |   19 +++++++++++++------
1 files changed, 13 insertions(+), 6 deletions(-)

applied to next.

- k