Thread (5 messages) flat view 5 messages, 4 authors, 2009-04-23
STALE6365d

[PATCH][BUILD FAILURE 03/12] Re: Next April 21 : PPC64 randconfig [arch/powerpc/kernel/of_platform.o]

From: Subrata Modak <hidden>
Date: 2009-04-22 16:17:20
Also in: linux-next, lkml

On Wed, 2009-04-22 at 00:20 +0530, Subrata Modak wrote:
Reported this earlier on 14th April 2009:
http://lkml.org/lkml/2009/4/14/480,

Michael,

Any fix in sight ?
http://lkml.org/lkml/2009/4/14/676,

CC      arch/powerpc/kernel/of_platform.o
arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
arch/powerpc/kernel/of_platform.c:270: error: implicit declaration of
function 'pci_devs_phb_init_dynamic'
arch/powerpc/kernel/of_platform.c:279: error: implicit declaration of
function 'scan_phb'
arch/powerpc/kernel/of_platform.c:295: error: implicit declaration of
function 'pci_bus_add_devices'
make[1]: *** [arch/powerpc/kernel/of_platform.o] Error 1
make: *** [arch/powerpc/kernel] Error 2
---
Well, 'pci_devs_phb_init_dynamic', 'scan_phb' & 'pci_bus_add_devices'
has been defined at ./arch/powerpc/include/asm/ppc-pci.h, but as
	#ifdef CONFIG_PCI
the reason for which the declarations were not visible. And these
would churn out few additional failures also for PPC build, like:

CC      arch/powerpc/kernel/pci_dn.o
arch/powerpc/kernel/pci_dn.c:82: error: expected declaration specifiers or ���...��� before ���traverse_func���
arch/powerpc/kernel/pci_dn.c: In function ���traverse_pci_devices���:
arch/powerpc/kernel/pci_dn.c:97: error: ���pre��� undeclared (first use in this function)
arch/powerpc/kernel/pci_dn.c:97: error: (Each undeclared identifier is reported only once
arch/powerpc/kernel/pci_dn.c:97: error: for each function it appears in.)
arch/powerpc/kernel/pci_dn.c:97: error: implicit declaration of function ���pre���
arch/powerpc/kernel/pci_dn.c:97: warning: assignment makes pointer from integer without a cast
arch/powerpc/kernel/pci_dn.c: In function ���pci_devs_phb_init_dynamic���:
arch/powerpc/kernel/pci_dn.c:143: error: too many arguments to function ���traverse_pci_devices���
arch/powerpc/kernel/pci_dn.c: In function ���fetch_dev_dn���:
arch/powerpc/kernel/pci_dn.c:180: error: too many arguments to function ���traverse_pci_devices���
arch/powerpc/kernel/pci_dn.c: In function ���pci_devs_phb_init���:
arch/powerpc/kernel/pci_dn.c:224: error: ���hose_list��� undeclared (first use in this function)
make[1]: *** [arch/powerpc/kernel/pci_dn.o] Error 1
make: *** [arch/powerpc/kernel/pci_dn.o] Error 2
---
CC      arch/powerpc/platforms/pseries/pci_dlpar.o
arch/powerpc/platforms/pseries/pci_dlpar.c: In function ���pcibios_remove_pci_devices���:
arch/powerpc/platforms/pseries/pci_dlpar.c:88: error: implicit declaration of function ���pci_remove_bus_device���
arch/powerpc/platforms/pseries/pci_dlpar.c: In function ���pcibios_add_pci_devices���:
arch/powerpc/platforms/pseries/pci_dlpar.c:121: error: implicit declaration of function ���pci_scan_slot���
arch/powerpc/platforms/pseries/pci_dlpar.c:130: error: implicit declaration of function ���pci_scan_bridge���
arch/powerpc/platforms/pseries/pci_dlpar.c: In function ���init_phb_dynamic���:
arch/powerpc/platforms/pseries/pci_dlpar.c:146: error: implicit declaration of function ���rtas_setup_phb���
arch/powerpc/platforms/pseries/pci_dlpar.c:149: error: implicit declaration of function ���pci_devs_phb_init_dynamic���
arch/powerpc/platforms/pseries/pci_dlpar.c:154: error: implicit declaration of function ���scan_phb���
arch/powerpc/platforms/pseries/pci_dlpar.c: In function ���remove_phb_dynamic���:
arch/powerpc/platforms/pseries/pci_dlpar.c:191: error: implicit declaration of function ���pci_remove_bus���
make[1]: *** [arch/powerpc/platforms/pseries/pci_dlpar.o] Error 1
make: *** [arch/powerpc/platforms/pseries/pci_dlpar.o] Error 2
---

The following patch attempts to fix them all. I had tested them. Please review.

Signed-Off-By: Subrata Modak <redacted>,
To: Paul Mackerras <redacted>
To: Linuxppc-dev <redacted>
Cc: Michael Ellerman <redacted>
Cc: Balbir Singh <redacted>
Cc: Sachin P Sant <redacted>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <redacted>
Cc: linux-next <redacted>
Cc: linux-kernel <redacted>
Cc: Alexander Beregalov <redacted>
---
--- linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/kernel/of_platform.c.orig	2009-04-22 09:50:32.000000000 -0500
+++ linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/kernel/of_platform.c	2009-04-22 10:06:52.000000000 -0500
@@ -230,7 +230,7 @@ struct of_device *of_find_device_by_phan
 EXPORT_SYMBOL(of_find_device_by_phandle);
 
 
-#ifdef CONFIG_PPC_OF_PLATFORM_PCI
+#if defined(CONFIG_PPC_OF_PLATFORM_PCI) && defined(CONFIG_PCI)
 
 /* The probing of PCI controllers from of_platform is currently
  * 64 bits only, mostly due to gratuitous differences between
--- linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/kernel/pci_dn.c.orig	2009-04-22 10:07:21.000000000 -0500
+++ linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/kernel/pci_dn.c	2009-04-22 10:09:10.000000000 -0500
@@ -35,6 +35,8 @@
  * Traverse_func that inits the PCI fields of the device node.
  * NOTE: this *must* be done before read/write config to the device.
  */
+
+#ifdef CONFIG_PCI
 static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
@@ -226,3 +228,4 @@ void __init pci_devs_phb_init(void)
 
 	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
 }
+#endif
--- linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/platforms/pseries/pci_dlpar.c.orig	2009-04-22 10:10:26.000000000 -0500
+++ linux-2.6.30-rc2-next20090421-randconfig/arch/powerpc/platforms/pseries/pci_dlpar.c	2009-04-22 10:12:23.000000000 -0500
@@ -33,6 +33,7 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 
+#ifdef CONFIG_PCI
 static struct pci_bus *
 find_bus_among_children(struct pci_bus *bus,
                         struct device_node *dn)
@@ -208,3 +209,4 @@ int remove_phb_dynamic(struct pci_contro
 	return 0;
 }
 EXPORT_SYMBOL_GPL(remove_phb_dynamic);
+#endif
---
Regards--
Subrata
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help