Re: [PATCH 4/4] powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
From: Martyn Welch <hidden>
Date: 2009-03-20 09:38:32
Anton Vorontsov wrote:
Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <redacted> Suggested-by: Kumar Gala <redacted> Signed-off-by: Anton Vorontsov <redacted> --- arch/powerpc/boot/dts/gef_ppc9a.dts | 39 ++++--- arch/powerpc/boot/dts/gef_sbc310.dts | 39 ++++--- arch/powerpc/boot/dts/gef_sbc610.dts | 39 ++++--- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 157 +++++++++++++++------------- arch/powerpc/boot/dts/sbc8641d.dts | 156 +++++++++++++++------------- arch/powerpc/platforms/86xx/gef_ppc9a.c | 1 + arch/powerpc/platforms/86xx/gef_sbc310.c | 1 + arch/powerpc/platforms/86xx/gef_sbc610.c | 1 + arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 1 + arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 1 + arch/powerpc/platforms/86xx/sbc8641d.c | 1 + 11 files changed, 237 insertions(+), 199 deletions(-)
Tested on ppc9a. Other GE Fanuc boards look sane. Tested-by: Martyn Welch <redacted> Martyn -- Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748 GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square, Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 729849476