Re: [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver
From: 山崎 精二 <hidden>
Date: 2009-03-23 07:06:50
Also in:
lkml
Hi I downloaded linux-2.6.29-rc8.tar.bz2,and I patched . I was succeeded. Thank you very match. But I have the other problem. Compile was not succeeded. Message is ... CALL arch/powerpc/kernel/prom_init_check.sh CC drivers/mmc/host/sdhci-of.o drivers/mmc/host/sdhci-of.c:163: error: 'SDHCI_QUIRK_FORCE_BLK_SZ_2048' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:164: error: 'SDHCI_QUIRK_BROKEN_CARD_DETECTION' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:165: error: 'SDHCI_QUIRK_INVERTED_WRITE_PROTECT' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:167: error: 'SDHCI_QUIRK_NONSTANDARD_CLOCK' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:168: error: 'SDHCI_QUIRK_PIO_NEEDS_DELAY' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:169: error: 'SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET' undeclared here (not in a function) drivers/mmc/host/sdhci-of.c:172: error: unknown field 'readl' specified in initializer drivers/mmc/host/sdhci-of.c:172: warning: initialization from incompatible pointer type drivers/mmc/host/sdhci-of.c:173: error: unknown field 'readw' specified in initializer drivers/mmc/host/sdhci-of.c:173: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:173: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:174: error: unknown field 'readb' specified in initializer drivers/mmc/host/sdhci-of.c:174: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:174: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:175: error: unknown field 'writel' specified in initializer drivers/mmc/host/sdhci-of.c:175: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:175: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:176: error: unknown field 'writew' specified in initializer drivers/mmc/host/sdhci-of.c:176: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:176: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:177: error: unknown field 'writeb' specified in initializer drivers/mmc/host/sdhci-of.c:177: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:177: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:178: error: unknown field 'set_clock' specified in initializer drivers/mmc/host/sdhci-of.c:178: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:178: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:180: error: unknown field 'get_max_clock' specified in initializer drivers/mmc/host/sdhci-of.c:180: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:180: warning: (near initialization for 'sdhci_esdhc.ops') drivers/mmc/host/sdhci-of.c:181: error: unknown field 'get_timeout_clock' specified in initializer drivers/mmc/host/sdhci-of.c:181: warning: excess elements in struct initializer drivers/mmc/host/sdhci-of.c:181: warning: (near initialization for 'sdhci_esdhc.ops') make[3]: *** [drivers/mmc/host/sdhci-of.o] Error 1 make[2]: *** [drivers/mmc/host] Error 2 make[1]: *** [drivers/mmc] Error 2 make: *** [drivers] Error 2 I do not know why. Could you please tell us why. Thanks. On Sat, 21 Mar 2009 03:45:06 +0300 Anton Vorontsov [off-list ref] wrote:
On Sat, Mar 21, 2009 at 09:15:25AM +0900, yamazaki wrote:quoted
Hi Thank you for your reply. I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device which is probably new product.Ah, then it must be connected via MPC8347's localbus. Well, then you need 2.6.29-rcX kernels, for example http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2 is suitable. Untar it and apply the patches (they'll apply fine on that kernel). Then you'll need some device tree additions for your MPC8347 board, something like this: localbus@e0005000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8347-localbus", "fsl,pq2pro-localbus"; reg = <0xe0005000 0xd8>; ranges = <0x1 0x0 0xf0000000 0x1000>; // ^^ change the 0xf0000000 to the actual address sdhci@1,0 { compatible = "ricoh,r5c807", "generic-sdhci"; reg = <0x1 0x0 0x1000>; interrupts = <ricoh-interrupt-here 0x8>; interrupt-parent = <&ipic>; // if needed, clock-frequency = <freq-in-HZ-here>; }; }; Note that I'm not sure what endiannes you'll get when connecting the ricoh chip to the big-endinan host... -- Anton Vorontsov email: cbouatmailru@gmail.com irc://irc.freenode.net/bd2
-- 山崎 精二 [off-list ref]