Re: [MPC8272ADS]Problem adding flash partitions inside the device tree

2009/2/12 Pieter [off-list ref]

Jean-Michel Hautbois wrote:

quoted

Warning (reg_format): "reg" property in
/localbus@f0010100/flash@0,0/partition@ff800000 has invalid length (8
JM

You are missing some definitions, The #address-cells and #size-cells = <1>;
tis is a snippet of teh dts i defined for my board.

       flash@0,0 {
           #address-cells = <1>;
           #size-cells = <1>;
           compatible = "cfi-flash";
           reg = <0x0 0x0 0x08000000>;
            bank-width = <4>;
           device-width = <1>;

            /* set flash partition to correspond tu mtd parts in
u-boot*/
           /*     0xf8000000 */
           partition@0x0 {
               label = "factory-image";
               reg = <0x00000000 0x01000000>;
           };
           /*     0xf9000000 */
           partition@0x01000000 {
               label = "app-image-1";
               reg = <0x01000000 0x01000000>;
           };
cheers pieter

Hi do have these definitions, at a higher level:
 localbus@f0010100 {
                compatible = "fsl,mpc8272-localbus",
                             "fsl,pq2-localbus";
                #address-cells = <2>;
                #size-cells = <1>;
                reg = <0xf0010100 0x40>;

                ranges = <0x0 0x0 0xfe000000 0x2000000
                          0x1 0x0 0xf4500000 0x8000
                          0x3 0x0 0xf8200000 0x8000>;

                flash@0,0 {
etc.

Regards,
JM