[PATCH 01/11] sdhci: Add quirk for controllers with no end-of-busy IRQ
From: Anton Vorontsov <hidden>
Date: 2009-02-06 18:06:54
Also in:
lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, the rest · Maintainers:
Ulf Hansson, Adrian Hunter, Linus Torvalds
From: Ben Dooks <ben-linux@fluff.org> The Samsung SDHCI (and FSL eSDHC) controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the new busy method are the cause of the behaviour change. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <redacted> --- drivers/mmc/host/sdhci.c | 5 ++++- drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6b2d1f9..0a1f5c5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c@@ -1291,8 +1291,11 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) if (host->cmd->data) DBG("Cannot wait for busy signal when also " "doing a data transfer"); - else + else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)) return; + + /* The controller does not support the end-of-busy IRQ, + * fall through and take the SDHCI_INT_RESPONSE */ } if (intmask & SDHCI_INT_RESPONSE)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 3efba23..2d08dd4 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h@@ -210,6 +210,8 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) /* Controller supports high speed but doesn't have the caps bit set */ #define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) +/* Controller does not provide transfer-complete interrupt when not busy */ +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<15) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5