Re: MPC8313 and Marvell PHY 88e1112
flat view
From: Martyn Welch <hidden>
Date: 2008-12-01 12:22:11
Carlos Roberto Moratelli wrote:
Hi,
Hi Carlos,
I am working in a custom board based on a mpc8313erdb and my Kernel version is 2.6.24. This board has a Marvell PHY 88E1112 on TSEC2 processor port. The problem is that the PHY is detected and configured, but no data can be send or received. I am sure that dtb is fine. In another custom board I have a 88e3015 on TSEC2 and it is working fine. Did someone work with this PHY? Does Compiling gianfar and Marvell support on Kernel is enough?
We have a board using a 8641d and Marvel 88E1111 PHY. I had problems getting the PHY to work correctly when using the Marvell PHY driver, however we were using the PHY as a standard PHY and found that the generic PHY driver worked just fine. Have you tried it without enabling the Marvell PHY driver so it uses the generic one? Martyn -- Martyn Welch MEng MPhil MIET (Principal Software Engineer) T:+44(0)1327322748 GE Fanuc Intelligent Platforms Ltd, |Registered in England and Wales Tove Valley Business Park, Towcester, |(3828642) at 100 Barbirolli Square, Northants, NN12 6PF, UK T:+44(0)1327359444 |Manchester,M2 3AB VAT:GB 729849476