Re: [PATCH 2/2] i2c: MPC8349E-mITX Power Management and GPIO expander driver

On Sep 23, 2008, at 9:13 AM, Anton Vorontsov wrote:

On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a
Freescale MC9S08QG8 (MCU) chip with the custom firmware
pre-programmed. The chip is used to power-off the board by the
software, and to control some GPIO pins.

Signed-off-by: Anton Vorontsov <redacted>
---
drivers/i2c/chips/Kconfig            |   11 ++
drivers/i2c/chips/Makefile           |    1 +
drivers/i2c/chips/mcu_mpc8349emitx.c |  209 ++++++++++++++++++++++++++++++++++
3 files changed, 221 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/chips/mcu_mpc8349emitx.c

is the plan to connect ppc_md.machine_shutdown() with this?

- k