[PATCH v4 0/2] powerpc: Board support for GE Fanuc SBC610
From: Martyn Welch <hidden>
Date: 2008-09-01 10:27:58
The following series implements basic board support for GE Fanuc's SBC610, a 6U single board computer, based on Freescale's MPC8641D. This series provides basic functionality: - The board can boot with a serial console. - Ethernet works, though the phys are polled. - The PCI bus is scanned and sata functions. Signed-off-by: Martyn Welch <redacted> --- Kumar: Thanks once again for your comments. I have altered "reg" variables, inline with suggestions and existing dts files. I have not removed the cpu *-frequency entires - these are required to be present for u-boot 1.2.0, which will alter but not create them. Martyn arch/powerpc/boot/dts/gef_sbc610.dts | 259 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/86xx/Kconfig | 9 + arch/powerpc/platforms/86xx/Makefile | 1 arch/powerpc/platforms/86xx/gef_sbc610.c | 152 ++++++++++++++++++ 4 files changed, 420 insertions(+), 1 deletions(-)