Re: Mounting PRAMFS support

Dear Pieter,

In message [ref] you wrote:

Im using a ppc85xx processor with Denx ELDK (4.1) The board  has 512MB
DDR2 and the board config reserves 64M for pram. during bootup the
mem=$mem argument is passed to the linux kernel command line and linux
boots successfully.

So what are the exact boot messages of your kernel?

I am unable to mount the PRAMFS - all documentation leads me to use

mount -t pramfs -o physaddr=0x1c000000,init=0x4000000 none /mnt

-------------------------------------------------------------^^^^

witch fails with the message:
mounting none on /mtd failed: no such devise 

-------------------^^^^

/mnt != /mtd

There is something worng, probably your description. It would be
better if you showed the precise commands and outpout from your
target system.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"Open the pod bay doors, HAL."                    - Dave Bowman, 2001