Hi Grant,

John Bonesio is working with Montavista to get these problems solved.

Thanks,
John

-----Original Message-----
From: linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org

[mailto:linuxppc-embedded-

bounces+john.linn=3Dxilinx.com@ozlabs.org] On Behalf Of Grant Likely
Sent: Thursday, July 31, 2008 8:34 PM
To: Naresh Bhat
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Board is not booting - Please Help me
=

On Wed, Jul 30, 2008 at 01:14:52PM +0530, Naresh Bhat wrote:

quoted

Hi Guys
I have ML507 board.  By using "ml507_bsb_design_ppc440.zip"
I have created the "Base System Builder" project and also

I am able to create the following files sucessfully.

1. My own "DTS" file (attached with the mail)
2. My own "download.bit" file
3. My own ACE file. (Used the Montavista Pro 5.0 kernel., Kernel is

compiled

quoted

with ARCH=3Dpowerpc, CROSS_COMPILE=3Dppc_440-, used the ml507_defconfig=

)

=

Unfortunately, I'm not able to help much with the Montavista kernel
since I don't know anything about which version it is based on.  Have
you tried using the current mainline kernel source or Xilinx's

published

git repo?
=

To use mainline, try copying your .dts file to
arch/powerpc/boot/dts/virtex440-myml507.dts and then build the kernel
with 'make simpleImage.virtex440-myml507'
=

g.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

This email and any attachments are intended for the sole use of the named r=
ecipient(s) and contain(s) confidential information that may be proprietary=
, privileged or copyrighted under applicable law. If you are not the intend=
ed recipient, do not read, copy, or forward this email message or any attac=
hments. Delete this email message and any attachments immediately.