RE: hang w/ppc6xx_defconfig related to 'simple-bus' compatible
flat view
From: John Linn <hidden>
Date: 2008-08-06 19:03:52
I was thinking it's CONFIG_PPC_UDBG_16550. -- John
-----Original Message----- From: <redacted>
[mailto:linuxppc-dev-
bounces+john.linn=3Dxilinx.com@ozlabs.org] On Behalf Of Kumar Gala Sent: Wednesday, August 06, 2008 12:39 PM To: Stephen Neuendorffer Cc: Scott Wood; ppc-dev list Subject: Re: hang w/ppc6xx_defconfig related to 'simple-bus'
compatible
=
Do you know what the CONFIG_ option is called for the legacy driver. =
- k =
On Aug 6, 2008, at 1:02 PM, Stephen Neuendorffer wrote: =
quoted
The problem (in my case) is that the legacy-serial driver doesn't accept all of the 16550 configurations accepted by the regular ns16550 driver. The problem is not related to simple-bus, but only became visible
when
quoted
simple-bus bindings are used because the legacy-serial driver specifically looks for an ns16550 node contained by a simple-bus. Most likely the hpcn_defconfig disables the legacy-serial driver altogether. Stevequoted
-----Original Message----- From:
linuxppc-dev-bounces+stephen.neuendorffer=3Dxilinx.com@ozlabs.org
quoted
[mailto:linuxppc-dev-quoted
bounces+stephen.neuendorffer=3Dxilinx.com@ozlabs.org] On Behalf Of ScottWoodquoted
Sent: Wednesday, August 06, 2008 10:36 AM To: <redacted> Cc: ppc-dev list Subject: Re: hang w/ppc6xx_defconfig related to 'simple-bus'compatiblequoted
On Wed, Aug 06, 2008 at 07:41:28AM -0600, Grant Likely wrote:quoted
On Tue, Aug 05, 2008 at 08:21:31AM -0500, Kumar Gala wrote:quoted
I'm trying to get the ppc6xx_defconfig booting on any 8641(74xx/e600)quoted
quoted
quoted
system. If I remove the 'simple-bus' compatible from the soc
node
quoted
inquoted
quoted
quoted
the .dts it works. Otherwise it hangs at but and looks to becrashed inquoted
quoted
quoted
the serial driver due to accessing memory at 0. I've tried the same .dts (w/'simple-bus') using the mpc8641_hpcn_defconfig and things work.The Xilinx folks hit something similar. ns16550 nodes get matchedifquoted
quoted
the parent claims simple-bus. If extra stuff needs to be done tousequoted
quoted
that port, then bad things happen.If extra stuff needs to be done, it shouldn't claim to be asimple-bus.quoted
-Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-devThis email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev=
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.