Re: [PATCH] Add AMCC Arches 460GT eval board support to platforms/44x

On Wed, Jul 16, 2008 at 07:50:25AM -0400, Josh Boyer wrote:

On Tue, 15 Jul 2008 22:33:26 -0700
fkan@amcc.com wrote:

quoted

From: Victor Gallardo <redacted>

ppc4xx: Add AMCC Arches 460GT eval board support 

Signed-off-by: Victor Gallardo <redacted>

From what I can tell, you don't even need this patch or the defconfig.
Nothing differs at this point from Glacier other than the DTS.  Since
U-Boot is your loader, it should be able to pass the different DTS to a
kernel that supports Cayonlands and have no issues.

quoted

---
 arch/powerpc/platforms/44x/Kconfig  |   18 ++++++++
 arch/powerpc/platforms/44x/Makefile |    1 +
 arch/powerpc/platforms/44x/arches.c |   76 +++++++++++++++++++++++++++++++++++
 3 files changed, 95 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/platforms/44x/arches.c

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 6abe913..95d1217 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig

@@ -77,6 +77,16 @@ config CANYONLANDS
 	help
 	  This option enables support for the AMCC PPC460EX evaluation board.

+config ARCHES
+	bool "Arches"
+	depends on 44x
+	default n
+	select 460GT
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC460GT Arches board.

If you do want to have explicit support for Arches, that's fine.  Look
at how Yosemite is supported.  It just reuses Bamboo.  You could do the
same.

quoted

 config YOSEMITE
 	bool "Yosemite"
 	depends on 44x

@@ -149,6 +159,14 @@ config 460EX
 	select IBM_NEW_EMAC_ZMII
 	select IBM_NEW_EMAC_TAH

+config 460GT
+	bool
+	select PPC_FPU
+	select IBM_NEW_EMAC_EMAC4
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+	select IBM_NEW_EMAC_TAH

I don't see a reason to add this at all.  460EX and 460GT select the
same set of options.

quoted

 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool

diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 774165f..86a4823 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile

@@ -9,3 +9,4 @@ obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_CANYONLANDS) += canyonlands.o
+obj-$(CONFIG_ARCHES)	+= arches.o

Here you would just have:

obj-$(CONFIG_ARCHES) += cayonlands.o

quoted

diff --git a/arch/powerpc/platforms/44x/arches.c b/arch/powerpc/platforms/44x/arches.c
new file mode 100644
index 0000000..6d6aa66
--- /dev/null
+++ b/arch/powerpc/platforms/44x/arches.c

And then you don't need this file at all.  Just add a
"amcc,canyonlands" string to your root node compatible property.

No!  Don't do this because it is not true!

Instead, add your board name to canyonlands.c in canyonlands_probe().
It's not the most scalable solution, but it keeps you from lying about
your hardware in the .dts file.

I'm working on a more scalable solution for this, but for now just add
your specific board to canyonlands_probe().

Cheers,
g.