Re: MPC52xx generic DMA using bestcomm

On 7/7/08, Matt Sealey [off-list ref] wrote:

 Jon Smirl wrote:

quoted

On 7/7/08, Matt Sealey [off-list ref] wrote:

quoted

to do that the samples have to be alternated as they are fed into the
AC97 stream.  I think the codec can capture that way too but you
didn't put a transceiver on the S/PDIF line.

 OT, but the IDT STAC9766 doesn't support S/PDIF input, only output.

quoted

In my test driver you only get AC97 or S/PDIF. Grant and I are both
working on i2s drivers, when we get those sorted out it shouldn't be
too hard to add ac97 back in. That codec driver I sent you was about
95% complete.

 Indeed and to be honest I only gave it a short glance before having to
 do about a thousand other things, but I will take another peek some
 time this week :)

You should junk my PSC and DMA code and switch to the code Grant
recently posted. Codec should work as is. My PSC code is for a six
month old version of ASOC v2.

Grant's PSC driver needs to be split into a DMA library and i2s
driver. Then make an AC97 version based on his i2s driver that uses
the DMA library. Not hard once he splits the i2s driver.

We are getting closer to having full featured audio drivers for the
mpc5200 platform.

 --
 Matt Sealey [off-list ref]
 Genesi, Manager, Developer Relations

-- 
Jon Smirl
jonsmirl@gmail.com