Re: [PATCH] powerpc: Add i2c pins to dts and board setup

On Jul 2, 2008, at 11:06 AM, Jochen Friedrich wrote:

Initialize I2C pins on boards with CPM1/CPM2 controllers
and document the i2c bus in booting-without-of.

The boards don't have any I2C chips connected to the I2C
bus, so unless some external chips are connected to the
boards, this code is just an example of setting everything
else up.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
Documentation/powerpc/booting-without-of.txt |   42 +++++++++++++++++ 
+++++++++
arch/powerpc/boot/dts/mpc8272ads.dts         |   11 +++++++
arch/powerpc/boot/dts/mpc866ads.dts          |   11 +++++++
arch/powerpc/boot/dts/mpc885ads.dts          |   11 +++++++
arch/powerpc/platforms/82xx/mpc8272_ads.c    |    4 ++
arch/powerpc/platforms/8xx/mpc86xads_setup.c |    4 ++
arch/powerpc/platforms/8xx/mpc885ads_setup.c |    3 ++
7 files changed, 86 insertions(+), 0 deletions(-)

applied.

- k